LIST OF INTERNATIONAL ORGANISATION OF STANDARDISATION (ISO) STANDARDS. (1000-4999)

1. ISO 1000 SI units and recommendations for the use of their multiples and of certain other units [withdrawn 2009-11-17].
2. ISO 1004 Information processing – Magnetic ink character recognition – Print specifications.
3. ISO 1007 Photography – 135-size film and magazine – Specifications.
4. ISO 1034:1973 Aircraft - Ground air-conditioning connections.
5. ISO 1101 Geometrical product specifications (GPS) – Geometrical tolerancing – Tolerances of form, orientation, location and run-out.
6. ISO 1182 Reaction to fire tests for products—Non-combustibility test.
7. ISO 1217 Displacement compressors—Acceptance tests.
8. ISO 1222 Photography – Tripod connections.
9. ISO 1268 Fibre-reinforced plastics – Methods of producing test plates.
10. ISO 1402 Rubber and plastics hoses and hose assemblies - Hydrostatic testing.
11. ISO/IEC 1539 Information technology – Programming languages – Fortran.
12. ISO 1629 Rubber and latices – Nomenclature.
13. ISO 1663 Rigid cellular plastics – Determination of water vapour transmission properties.
14. ISO 1745 Information processing – Basic mode control procedures for data communication systems.
15. ISO 1750 Pesticides and other agrochemicals – Common names.
16. ISO 1928 Solid mineral fuels – Determination of gross calorific value by the bomb calorimetric method and calculation of net calorific value.
17. ISO/IEC 2022 Information technology – Character code structure and extension techniques.
18. ISO 2108 Information and documentation – International standard book number (ISBN).
19. ISO 2145 Documentation – Numbering of divisions and subdivisions in written documents.
20. ISO 2162 Technical product documentation – Springs.
21. ISO 2162-1 Simplified representation.
22. ISO 2162-2 Presentation of data for cylindrical helical compression springs.
23. ISO 2171 Cereals, pulses and by-products – Determination of ash yield by incineration.
24. ISO 2240:2003 Photography – Colour reversal camera films – Determination of ISO speed.
25. ISO 2848:1984 Building construction - Modular coordination - Principles and rules.
26. ISO 2533 Standard Atmosphere.
27. ISO 2692 Geometrical product specifications (GPS) – Geometrical tolerancing – Maximum material requirement (MMR), least material requirement (LMR) and reciprocity requirement (RPR).
28. ISO 2709 Information and documentation – Format for information exchange.
29. ISO 2768 General tolerances.
30. ISO 2768-1 Tolerances for linear and angular dimensions without individual tolerance indications.
31. ISO 2768-2 Geometrical tolerances for features without individual tolerance indications.
32. ISO 2852 Stainless steel clamp pipe couplings for the food industry.
33. ISO 3002 Basic quantities in cutting and grinding.
34. ISO 3082 Iron ores – Sampling and sample preparation procedures.
35. ISO 3098 Technical product documentation – Lettering.
36. ISO 3103 Tea – Preparation of liquor for use in sensory tests.
37. ISO 3166 Codes for the representation of names of countries and their subdivisions.
38. ISO 3166-1 Country codes.
39. ISO 3166-2 Country subdivision code.
40. ISO 3166-3 Code for formerly used names of countries.
41. ISO 3297 Information and documentation – International standard serial number (ISSN).
42. ISO 3394 Dimensions of rigid rectangular packages – Transport packages.
43. ISO 3506 Mechanical properties of corrosion-resistant stainless steel fasteners.
44. ISO 3534 Statistics – Vocabulary and symbols.
45. ISO 3534-1 General statistical terms and terms used in probability
46. ISO 3534-2 Applied statistics.
47. ISO 3534-3 Design of experiments.
48. ISO 3534-4 Survey sampling.
49. ISO 3536 Road vehicles – Safety glazing materials – Vocabulary.
50. ISO 3537 Road vehicles – Safety glazing materials – Mechanical tests.
51. ISO 3538 Road vehicles – Safety glazing materials – Test methods for optical properties.
52. ISO 3591 - Sensory analysis – Apparatus – Wine-tasting glass.
53. ISO 3593 Starch — Determination of ash.
54. ISO 3601 Fluid power systems – O-rings.
55. ISO 3601-1 Inside diameters, cross-sections, tolerances and designation codes.
56. ISO 3601-2 Housing dimensions for general applications.
57. ISO 3601-3 Quality acceptance criteria.
58. ISO 3601-4 Anti-extrusion rings (back-up rings).
59. ISO 3601-5 Suitability of elastomeric materials for industrial applications.
60. ISO 3602 Documentation – Romanization of Japanese (kana script)
61. ISO 3632 Spices – Saffron (Crocus sativus L.)
62. ISO 3635:1981 Size designation of clothes – Definitions and body measurement procedure.
63. ISO 3676 Packaging – Unit load sizes – Dimensions.
64. ISO 3690 Welding and allied processes — Determination of hydrogen content in arc weld metal.
65. ISO 3864 Graphical symbols – Safety colors and safety signs
66. ISO 3901 Information and documentation – International Standard Recording Code (ISRC).
67. ISO 3977 Gas turbines – Procurement.
68. ISO 4074 Natural latex rubber condoms – Requirements and test methods.
69. ISO 4157 Construction drawings – Designation systems.
70. ISO 4165 Road vehicles — Electrical connections — Double-pole connection.
71. ISO 4179 Ductile iron pipes and fittings for pressure and non-pressure pipelines – Cement mortar lining.
72. ISO 4217 Codes for the representation of currencies and funds.
73. ISO 4314 Surface active agents — Determination of free alkalinity or free acidity — Titrimetric method.
74. ISO 4578 Adhesives — Determination of peel resistance of high-strength adhesive bonds — Floating-roller method.
75. ISO 4582 Plastics — Determination of changes in colour and variations in properties after exposure to daylight under glass, natural weathering or laboratory light sources.
76. ISO 4587 Adhesives — Determination of tensile lap-shear strength of rigid-to-rigid bonded assemblies.
77. ISO 4628 Paints and varnishes – Evaluation of degradation of coatings – Designation of quantity and size of defects, and of intensity of uniform changes in appearance.
78. ISO 4628-1 General introduction and designation system.
79. ISO 4628-2 Assessment of degree of blistering.
80. ISO 4628-3 Assessment of degree of rusting.
81. ISO 4628-4 Assessment of degree of cracking.
82. ISO 4628-5 Assessment of degree of flaking.
83. ISO 4628-6 Assessment of degree of chalking by tape method.
84. ISO 4628-7 Assessment of degree of chalking by velvet method.
85. ISO 4628-8 Assessment of degree of delamination and corrosion around a scribe.
86. ISO 4628-10 Assessment of degree of filiform corrosion.
87. ISO/IEC 4873:1991 Information technology – ISO 8-bit code for information interchange – Structure and rules for implementation.
88. ISO 4892 Plastics – Methods of exposure to laboratory light sources.

Back to list                                   Home                                  Continue                                                   

LIST OF INTERNATIONAL ORGANISATION OF STANDARDISATION (ISO) STANDARDS. (ISO 5000 - 8999)

ISO CODES FROM ISO 5000 - 8999

1. ISO 5127 Information and documentation – Vocabulary.
2. ISO 5167 Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full.
3. ISO 5167-1 General principles and requirements.
4. ISO 5167-2 Orifice plates.
5. ISO 5167-3 Nozzles and Venturi nozzles.
6. ISO 5167-4 Venturi tubes.
7. ISO/IEC 5218 Information technology – Codes for the representation of human sexes.
8. ISO 5455 Technical drawings – Scales.
9. ISO 5457 Technical product documentation – Sizes and layout of drawing sheets.
10. ISO 5458 Geometrical Product Specifications (GPS) – Geometrical tolerancing – Positional tolerancing.
11. ISO 5459 Geometrical product specifications (GPS) – Geometrical tolerancing – Datums and datum systems.
12. ISO 5660 Reaction-to-fire tests – Heat release, smoke production and mass loss rate.
13. ISO 5660-1 Heat release rate (cone calorimeter method).
14. ISO 5660-2 Smoke production rate (dynamic measurement).
15. ISO/TS 5660-3 Guidance on measurement.
16. ISO 5725 Accuracy (trueness and precision) of measurement methods and results.
17. ISO 5775 Bicycle tires and rims.
18. ISO 5776 Graphic technology - Symbols for text correction
19. ISO 5800:2001 Photography – Colour negative films for still photography – Determination of ISO speed
20. ISO 5893 Rubber and plastics test equipment – Tensile, flexural and compression types (constant rate of traverse) – Specification
21. ISO 5964 Documentation – Guidelines for the establishment and development of multilingual thesauri
22. ISO 5971:1981 Size designation of clothes – Pantyhose
23. ISO 5993 Sodium hydroxide for industrial use—Determination of mercury content—Flameless atomic absorption spectrometric method
24. ISO 6107-4:1993 Water quality—Vocabulary
25. ISO 6166 Securities and related financial instruments – International securities identification numbering system (ISIN)
26. ISO 6194 Rotary-shaft lip-type seals incorporating elastomeric sealing elements
27. ISO 6194-5 Identification of visual imperfections
28. ISO 6336 Calculation of load capacity of spur and helical gears
29. ISO 6344 Coated abrasives – Grain size analysis
30. ISO 6346 Freight containers – Coding, identification and marking
31. ISO 6357 Documentation – Spine titles on books and other publications
32. ISO/IEC 6429 Information technology – Control functions for coded character sets
33. ISO 6438 Documentation – African coded character set for bibliographic information interchange
34. ISO/IEC 6523 Information technology – Structure for the identification of organizations and organization parts
35. ISO 6579 Microbiology of food and animal feeding stuffs – Horizontal method for the detection of Salmonella spp.
36. ISO 6594 Cast iron drainage pipes and fittings – Spigot series
37. ISO 6709 Standard representation of geographic point location by coordinates
38. ISO 6780 Flat pallets for intercontinental materials handling — Principal dimensions and tolerances
39. ISO 6892 Metallic materials – Tensile testing
40. ISO 6892-1 Method of test at room temperature
41. ISO 6892-2 Method of test at elevated temperature
42. ISO 6892-3 Method of test at low temperature
43. ISO 6892-4 Method of test in liquid helium
44. ISO 6946 Building components and building elements – Thermal resistance and thermal transmittance – Calculation method
45. ISO 7001 Graphical symbols – Public information symbols
46. ISO 7002 Agricultural food products – Layout for a standard method of sampling from a lot
47. ISO 7098 Information and documentation – Romanization of Chinese
48. ISO 7200 Technical product documentation – Data fields in title blocks and document headers
49. ISO 7240 Fire detection and alarm systems
50. ISO 7372 Trade data interchange
51. ISO/IEC 7498 Information technology -- Open Systems Interconnection — Basic Reference Model
52. ISO/IEC 7498-1 Information technology—Open Systems Interconnection—Basic Reference Model: The Basic Model
53. ISO 7498-2 Information processing systems—Open Systems Interconnection—Basic Reference Model—Part 2: Security Architecture
54. ISO/IEC 7498-3 Information technology—Open Systems Interconnection—Basic Reference Model: Naming and addressing
55. ISO/IEC 7501 Identification cards – Machine readable travel documents
56. ISO/IEC 7501-1:2008 Machine readable passport
57. ISO/IEC 7501-2:1997 Machine readable visa
58. ISO/IEC 7501-3:2005 Machine readable official travel documents
59. ISO 7736 Road vehicles – Car radio for front installation – Installation space including connections
60. ISO/IEC 7810 Identification cards – Physical characteristics
61. ISO/IEC 7811 Identification cards – Recording technique
62. ISO/IEC 7812 Identification cards – Identification of issuers
63. ISO/IEC 7813 Information technology – Identification cards – Financial transaction cards
64. ISO/IEC 7816 Identification cards – Integrated circuit cards
65. ISO/IEC 7942 Information technology – Computer graphics and image processing – Graphical Kernel System (GKS)
66. ISO 8000 Data quality
67. ISO 8015:2011 Geometrical product specifications (GPS) – Fundamentals – Concepts, principles and rules
68. ISO 8090 Cycles – Terminology
69. ISO 8180 Ductile iron pipelines – Polyethylene sleeving for site application
70. ISO 8373 Manipulating industrial robots – Vocabulary
71. ISO 8501 Preparation of steel substrates before application of paints and related products – Visual assessment of surface cleanliness
72. ISO 8559:1989 Garment construction and anthropometric surveys – Body dimensions
73. ISO 8573 Compressed air
74. ISO 8573-1 Contaminant and purity classes
75. ISO 8573-2 Test methods for oil aerosol content
76. ISO 8573-3 Test methods for measurement of humidity
77. ISO 8573-4 Test methods for solid particle content
78. ISO 8573-5 Test methods for oil vapour and organic solvent content
79. ISO 8573-6 Test methods for gaseous contaminant content
80. ISO 8573-7 Test method for viable microbiological contaminant content
81. ISO 8573-8 Test methods for solid particle content by mass concentration
82. ISO 8573-9 Test methods for liquid water content
83. ISO 8583 Financial transaction card originated messages – Interchange message specifications
84. ISO 8583-1 Message, data elements and code values
85. ISO 8583-2 Application and registration procedures for Institution Identification Codes (IIC)
86. ISO 8583-3 Maintenance procedures for messages, data elements, and code values
87. ISO 8601 Data elements and interchange formats – Information interchange – Representation of dates and times
88. ISO/IEC 8613 Information technology – Open Document Architecture (ODA) and interchange format
89. ISO/IEC 8632 Information technology – Computer graphics – Metafile for the storage and transfer of picture description information
90. ISO/IEC 8632-1 Functional specification
91. ISO/IEC 8632-2 Character encoding
92. ISO/IEC 8632-3 Binary encoding [withdrawn 2001-06-21]
93. ISO/IEC 8632-4 Clear text encoding
94. ISO 8651 Information technology – Computer graphics – Graphical Kernel System (GKS) language bindings[Note 3]
95. ISO/IEC 8652 Information technology – Programming languages – Ada
96. ISO 8653:1986 Jewellery – Ring-sizes – Definition, measurement and designation
97. ISO 8691 Petroleum products – Low levels of vanadium in liquid fuels – Determination by flameless atomic absorption spectrometry after ashing
98. ISO 8805 Information processing systems – Computer graphics – Graphical Kernel System for Three Dimensions (GKS-3D) functional description
99. ISO/IEEC 8806 Information technology – Computer graphics – Graphical Kernel System for Three Dimensions (GKS-3D) language bindings
100. ISO/IEEC 8806-4 C
101. ISO 8807 Information processing systems – Open Systems Interconnection – LOTOS – A formal description technique based on the temporal ordering of observational behavior.
102. ISO/IEC 8824 Information technology – Abstract Syntax Notation One (ASN.1)
103. ISO/IEC 8825 Information technology – ASN.1 encoding rules
104. ISO/IEC 8859 Information technology – 8-bit single-byte coded graphic character sets
105. ISO/IEC 8859-1 Latin alphabet No. 1
106. ISO/IEC 8859-2 Latin alphabet No. 2
107. ISO/IEC 8859-3 Latin alphabet No. 3
108. ISO/IEC 8859-4 Latin alphabet No. 4
109. ISO/IEC 8859-5 Latin/Cyrillic alphabet
110. ISO/IEC 8859-6 Latin/Arabic alphabet
111. ISO/IEC 8859-7 Latin/Greek alphabet
112. ISO/IEC 8859-8 Latin/Hebrew alphabet
113. ISO/IEC 8859-9 Latin alphabet No. 5
114. ISO/IEC 8859-10 Latin alphabet No. 6
115. ISO/IEC 8859-11 Latin/Thai alphabet
116. ISO/IEC 8859-13 Latin alphabet No. 7
117. ISO/IEC 8859-14 Latin alphabet No. 8 (Celtic)
118. ISO/IEC 8859-15 Latin alphabet No. 9
119. ISO/IEC 8859-16 Latin alphabet No. 10
120. ISO 8879 Information processing – Text and office systems – Standard Generalized Markup Language (SGML)

Back to list                                   Home                                                                                

LIST OF INTERNATIONAL ORGANISATION OF STANDARDISATION (ISO) STANDARDS. (ISO 100-199)

SERIES FROM ISO 100 TO ISO 199

• ISO 100:1984 Pulleys for flat transmission belts—Crowns [Withdrawn: replaced with ISO 22]. 
• ISO 102:1990 Aircraft—Gravity filling orifices. 
• ISO 104:2002 Rolling bearings—Thrust bearings—Boundary dimensions, general plan. 
• ISO 105 Textiles — Tests for colour fastness. 
• ISO 105-A01:2010 Part A01: General principles of testing. 
• ISO 105-A02:1993 Part A02: Grey scale for assessing change in colour. 
• ISO 105-A03:1993 Part A03: Grey scale for assessing staining. 
• ISO 105-A04:1989 Part A04: Method for the instrumental assessment of the degree of staining of adjacent fabrics. 
• ISO 105-A05:1996 Part A05: Instrumental assessment of change in colour for determination of grey scale rating. 
• ISO 105-A06:1995 Part A06: Instrumental determination of 1/1 standard depth of colour. 
• ISO 105-A08:2001 Part A08: Vocabulary used in colour measurement. 
• ISO 105-A11:2012 Part A11: Determination of colour fastness grades by digital imaging techniques. 
• ISO 105-B01:1994 Part B01: Colour fastness to light: Daylight. 
• ISO 105-B02:2013 Part B02: Colour fastness to artificial light: Xenon arc fading lamp test. 
• ISO 105-B03:1994 Part B03: Colour fastness to weathering: Outdoor exposure. 
• ISO 105-B04:1994 Part B04: Colour fastness to artificial weathering: Xenon arc fading lamp test. 
• ISO 105-B05:1993 Part B05: Detection and assessment of photochromism. 
• ISO 105-B06:1998 Part B06: Colour fastness and ageing to artificial light at high temperatures: Xenon arc fading lamp test. 
• ISO 105-B07:2009 Part B07: Colour fastness to light of textiles wetted with artificial perspiration. 
• ISO 105-B08:1995 Part B08: Quality control of blue wool reference materials 1 to 7. 
• ISO 105-B10:2011 Part B10: Artificial weathering—Exposure to filtered xenon-arc radiation. 
• ISO 105-C06:2010 Part C06: Colour fastness to domestic and commercial laundering. 
• ISO 105-C07:1999 Part C07: Colour fastness to wet scrubbing of pigment printed textiles. 
• ISO 105-C08:2010 Part C08: Colour fastness to domestic and commercial laundering using a non-phosphate reference detergent incorporating a low-temperature bleach activator. 
• ISO 105-C09:2001 Part C09: Colour fastness to domestic and commercial laundering—Oxidative bleach response using a non-phosphate reference detergent incorporating a low temperature bleach activator. 
• ISO 105-C10:2006 Part C10: Colour fastness to washing with soap or soap and soda. 
• ISO 105-C12:2004 Part C12: Colour fastness to industrial laundering. 
• ISO 105-D01:2010 Part D01: Colour fastness to dry cleaning using perchloroethylene solvent. 
• ISO 105-D02:1993 Part D02: Colour fastness to rubbing: Organic solvents. 
• ISO 105-E01:2013 Part E01: Colour fastness to water. 
• ISO 105-E02:2013 Part E02: Colour fastness to seawater. 
• ISO 105-E03:2010 Part E03: Colour fastness to chlorinated water (swimming-pool water). 
• ISO 105-E04:2013 Part E04: Colour fastness to perspiration. 
• ISO 105-E05:2010 Part E05: Colour fastness to spotting: Acid. 
• ISO 105-E06:2006 Part E06: Colour fastness to spotting: Alkali. 
• ISO 105-E07:2010 Part E07: Colour fastness to spotting: Water. 
• ISO 105-E08:1994 Part E08: Colour fastness to hot water. 
• ISO 105-E09:2010 Part E09: Colour fastness to potting. 
• ISO 105-E10:1994 Part E10: Colour fastness to decatizing. 
• ISO 105-E11:1994 Part E11: Colour fastness to steaming. 
• ISO 105-E12:2010 Part E12: Colour fastness to milling: Alkaline milling. 
• ISO 105-E13:1994 Part E13: Colour fastness to acid-felting: Severe. 
• ISO 105-E14:1994 Part E14: Colour fastness to acid-felting: Mild. 
• ISO 105-E16:2006 Part E16: Colour fastness to water spotting on upholstery fabrics. 
• ISO 105-F01:2001 Part F01: Specification for wool adjacent fabric. 
• ISO 105-F02:2009 Part F02: Specification for cotton and viscose adjacent fabrics. 
• ISO 105-F03:2001 Part F03: Specification for polyamide adjacent fabric. 
• ISO 105-F04:2001 Part F04: Specification for polyester adjacent fabric. 
• ISO 105-F05:2001 Part F05: Specification for acrylic adjacent fabric. 
• ISO 105-F06:2000 Part F06: Specification for silk adjacent fabric. 
• ISO 105-F07:2001 Part F07: Specification for secondary acetate adjacent fabric. 
• ISO 105-F09:2009 Part F09: Specification for cotton rubbing cloth. 
• ISO 105-F10:1989 Part F10: Specification for adjacent fabric: Multifibre. 
• ISO 105-G01:1993 Part G01: Colour fastness to nitrogen oxides. 
• ISO 105-G02:1993 Part G02: Colour fastness to burnt-gas fumes. 
• ISO 105-G03:1993 Part G03: Colour fastness to ozone in the atmosphere. 
• ISO 105-G04:1989 Part G04: Colour fastness to oxides of nitrogen in the atmosphere at high humidities. 
• ISO 105-J01:1997 Part J01: General principles for measurement of surface colour. 
• ISO 105-J02:1997 Part J02: Instrumental assessment of relative whiteness. 
• ISO 105-J03:2009 Part J03: Calculation of colour differences. 
• ISO 105-J05:2007 Part J05: Method for the instrumental assessment of the colour inconstancy of a specimen with change in illuminant (CMCCON02). 
• ISO 105-N01:1993 Part N01: Colour fastness to bleaching: Hypochlorite. 
• ISO 105-N02:1993 Part N02: Colour fastness to bleaching: Peroxide. 
• ISO 105-N03:1993 Part N03: Colour fastness to bleaching: Sodium chlorite (mild). 
• ISO 105-N04:1993 Part N04: Colour fastness to bleaching: Sodium chlorite (severe). 
• ISO 105-N05:1993 Part N05: Colour fastness to stoving. 
• ISO 105-P01:1993 Part P01: Colour fastness to dry heat (excluding pressing). 
• ISO 105-P02:2002 Part P02: Colour fastness to pleating: Steam pleating. 
• ISO 105-S01:1993 Part S01: Colour fastness to vulcanization: Hot air. 
• ISO 105-S02:1993 Part S02: Colour fastness to vulcanization: Sulfur monochloride. 
• ISO 105-S03:1993 Part S03: Colour fastness to vulcanization: Open steam. 
• ISO 105-X01:1993 Part X01: Colour fastness to carbonizing: Aluminium chloride. 
• ISO 105-X02:1993 Part X02: Colour fastness to carbonizing: Sulfuric acid. 
• ISO 105-X04:1994 Part X04: Colour fastness to mercerizing. 
• ISO 105-X05:1994 Part X05: Colour fastness to organic solvents. 
• ISO 105-X06:1994 Part X06: Colour fastness to soda boiling. 
• ISO 105-X07:1994 Part X07: Colour fastness to cross-dyeing: Wool. 
• ISO 105-X08:1994 Part X08: Colour fastness to degumming. 
• ISO 105-X09:1993 Part X09: Colour fastness to formaldehyde. 
• ISO 105-X10:1993 Part X10: Assessment of migration of textile colours into polyvinyl chloride coatings. 
• ISO 105-X11:1994 Part X11: Colour fastness to hot pressing. 
• ISO 105-X12:2001 Part X12: Colour fastness to rubbing. 
• ISO 105-X 13:1994 Part X13: Colour fastness of wool dyes to processes using chemical means for creasing, pleating and setting. 
• ISO 105-X14:1994 Part X14: Colour fastness to acid chlorination of wool: Sodium dichloroisocyanurate. 
• ISO 105-X16:2001 Part X16: Colour fastness to rubbing—Small areas. 
• ISO 105-X18:2007 Part X18: Assessment of the potential to phenolic yellowing of materials. 
• ISO 105-Z01:1993 Part Z01: Colour fastness to metals in the dye-bath: Chromium salts. 
• ISO 105-Z02:1993 Part Z02: Colour fastness to metals in the dye-bath: Iron and copper. 
• ISO 105-Z03:1996 Part Z03: Intercompatibility of basic dyes for acrylic fibres. 
• ISO 105-Z04:1995 Part Z04: Dispersibility of disperse dyes. 
• ISO 105-Z05:1996 Part Z05: Determination of the dusting behaviour of dyes. 
• ISO 105-Z06:1998 Part Z06: Evaluation of dye and pigment migration. 
• ISO 105-Z07:1995 Part Z07: Determination of application solubility and solution stability of water-soluble dyes. 
• ISO 105-Z08:1995 Part Z08: Determination of solubility and solution stability of reactive dyes in the presence of electrolytes. 
• ISO 105-Z09:1995 Part Z09: Determination of cold water solubility of water-soluble dyes. 
• ISO 105-Z10:1997 Part Z10: Determination of relative colour strength of dyes in solution 
• ISO 105-Z11:1998 Part Z11: Evaluation of speckiness of colorant dispersions. 
• ISO 108:1976 Textile machinery and accessories—Weaving looms—Definition of left and right sides. 
• ISO 109:1982 Textile machinery—Working widths of weaving machines. 
• ISO 110:1978 Textile machinery and accessories—Cones for yarn winding (cross wound) -- Half angle of the cone 9 degrees 15' [Withdrawn without replacement]. 
• ISO 111:1978 Textile machinery and accessories—Cones for yarn winding (cross wound) -- Half angle of the cone 4 degrees 20' [Withdrawn: Replaced with ISO 8489-3]. 
• ISO 112:1983 Textile machinery and accessories—Cones for yarn winding (cross wound) -- Half angle of the cone 3 degrees 30' [Withdrawn: Replaced with ISO 8489-2]. 
• ISO 113:2010 Rolling bearings—Plummer block housings—Boundary dimensions. 
• ISO 114:1980 99.8 Unalloyed magnesium ingots—Chemical composition [Withdrawn: Replaced by ISO 8287]. 
• ISO 115:2003 Unalloyed aluminium ingots for remelting—Classification and composition. 
• ISO 119:1977 Plastics—Phenol-formaldehyde mouldings—Determination of free phenols—Iodometric method. 
• ISO 120:1977 Plastics—Phenol-formaldehyde mouldings—Determination of free ammonia and ammonium compounds—Colorimetric comparison method. 
• ISO 121:1980 Magnesium-aluminium-zinc alloy ingots and alloy castings—Chemical composition and mechanical properties of sand cast reference test bars [Withdrawn: replaced by ISO 16220]. 
• ISO 123:2001 Rubber latex—Sampling. 
• ISO 124:2011 Latex, rubber—Determination of total solids content. 
• ISO 125:2011 Natural rubber latex concentrate—Determination of alkalinity. 
• ISO 126:2005 Natural rubber latex concentrate—Determination of dry rubber content. 
• ISO 127:2012 Rubber, natural latex concentrate—Determination of KOH number. 
• ISO 128 Technical drawings—General principles of presentation. 
• ISO 129 
• ISO 129-1:2004 Technical drawings—Indication of dimensions and tolerances—Part 1: General principles. 
• ISO 129-4:2013 Technical product documentation (TPD) -- Indication of dimensions and tolerances—Part 4: Dimensioning of shipbuilding drawings. 
• ISO 131:1979 Acoustics—Expression of physical and subjective magnitudes of sound or noise in air [Withdrawn without replacement]. 
• ISO 132:2011 Rubber, vulcanized or thermoplastic—Determination of flex cracking and crack growth (De Mattia). 
• ISO 133:1983 Rubber, vulcanized—Determination of crack growth (De Mattia) [Withdrawn: Replaced with ISO 132]. 
• ISO 136:1972 Steel—Simple torsion testing of wire [Withdrawn replaced by ISO 7800]. 
• ISO 137:1975 Wool—Determination of fibre diameter—Projection microscope method. 
• ISO 139:2005 Textiles—Standard atmospheres for conditioning and testing. 
• ISO 140 Acoustics—Measurement of sound insulation in buildings and of building elements. 
• ISO 140-2:1991 Part 2: Determination, verification and application of precision data. 
• ISO 140-4:1998 Part 4: Field measurements of airborne sound insulation between rooms. 
• ISO 140-5:1998 Part 5: Field measurements of airborne sound insulation of façade elements and façades. 
• ISO 140-7:1998 Part 7: Field measurements of impact sound insulation of floors. 
• ISO 140-14:2004 Part 14: Guidelines for special situations in the field. 
• ISO 140-18:2006 Part 18: Laboratory measurement of sound generated by rainfall on building elements. 
• ISO 141:1976 Textile machinery and accessories—Pirn winders and cross winders—Definition of left and right sides. 
• ISO 142:1976 Textile machinery and accessories—Weaving preparatory machines—Definition of left and right sides. 
• ISO 143:1977 Textile machinery and accessories—Weft pirns for automatic looms [Withdrawn without replacement]. 
• ISO 144:1973 Steel—Reverse bend testing of wire [Withdrawn: replaced with ISO 7801]. 
• ISO 146:1984 Metallic materials—Hardness test—Verification of Vickers hardness testing machines HV 0,2 to HV 100 [Withdrawn replaced with ISO 6507-2]. 
• ISO 146-2:1993 Metallic materials—Verification of Vickers hardness testing machines—Part 2: Less than HV 0,2 [Withdrawn replaced with ISO 6507-2]. 
• ISO 148 Metallic materials—Charpy pendulum impact test. 
• ISO 148-1:2009 Part 1: Test method. 
• ISO 148-2:2008 Part 2: Verification of testing machines. 
• ISO 148-3:2008 Part 3: Preparation and characterization of Charpy V-notch test pieces for indirect verification of pendulum impact machines. 
• ISO 150:2006 Raw, refined and boiled linseed oil for paints and varnishes—Specifications and methods of test. 
• ISO 155:1998 Belt drives—Pulleys—Limiting values for adjustment of centres. 
• ISO 156:1982 Metallic materials—Hardness test—Verification of Brinell hardness testing machines [Withdrawn replaced by ISO 6506-2]. 
• ISO 157:1996 Coal—Determination of forms of sulfur. 
• ISO 160:1980 Asbestos-cement pressure pipes and joints [Withdrawn without replacement]. 
• ISO 161 Thermoplastics pipes for the conveyance of fluids—Nominal outside diameters and nominal pressures. 
• ISO 161-1:1996 Part 1: Metric series. 
• ISO 161-2:1996 Part 2: Inch-based series. 
• ISO 162:1985 Cinematography—Head gaps and sound records for three-, four-, or six-track magnetic sound records on 35 mm and single-track on 17,5 mm motion-picture film containing no picture—Positions and width dimensions. 
• ISO 171:1980 Plastics—Determination of bulk factor of moulding materials. 
• ISO 172:1978 Plastics—Phenol-formaldehyde mouldings—Detection of free ammonia. 
• ISO 174:1974 Plastics—Homopolymer and copolymer resins of vinyl chloride—Determination of viscosity number in dilute solution [Withdrawn replaced by ISO 1628-2].

 

Back to list                                   Home                                  Continue

LIST OF INTERNATIONAL ORGANISATION OF STANDARDISATION (ISO) STANDARDS. (ISO 200-999)

 ISO CODES FROM 200-999

• ISO 216:2007 Writing paper and certain classes of printed matter – Trimmed sizes – A and B series, and an indication of machine direction

• ISO 226:2003 Acoustics – Normal equal-loudness-level contours

• ISO 228 Pipe threads where pressure-tight joints are not made on the threads

• ISO 233 Information and documentation – Transliteration of Arabic characters into Latin characters.

• ISO 259 Information and documentation – Transliteration of Hebrew characters into Latin characters.

• ISO 261 ISO general purpose metric screw threads – General plan

• ISO 262 ISO general purpose metric screw threads – Selected sizes for screws, bolts and nuts

• ISO 286-1 Geometrical product specifications (GPS) – ISO code system for tolerances on linear sizes – Part 1: Basis of tolerances, deviations and fits

• ISO 286-2 Geometrical product specifications (GPS) – ISO code system for tolerances on linear sizes – Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts

• ISO 361 Basic ionizing radiation symbol

• ISO 500 Agricultural tractors – Rear-mounted power take-off types 1, 2 and 3

• ISO 518:2006 Photography – Camera accessory shoes, with and without electrical contacts, for photoflash lamps and electronic photoflash units – Specification

• ISO 519:1992 Photography – Hand-held cameras – Flash-connector dimensions

• ISO 536:2012 Paper and board – Determination of grammage

• ISO 639 Codes for the representation of names of languages

• ISO 639-1 Alpha-2 code

• ISO 639-2 Alpha-3 code

• ISO 639-3 Alpha-3 code for comprehensive coverage of languages

• ISO 639-4 General principles of coding of the representation of names of languages and related entities, and application guidelines

• ISO 639-5 Alpha-3 code for language families and groups

• ISO 639-6 Alpha-4 code for comprehensive coverage of language variants

• ISO/IEC 646 Information technology – ISO 7-bit coded character set for information interchange

• ISO 657 Hot-rolled steel sections

• ISO 668 Series 1 freight containers – Classification, dimensions and ratings

• ISO 690 Information and documentation – Guidelines for bibliographic references and citations to information resources

• ISO 704 Terminology work – Principles and methods

• ISO 732 Photography – 120-size and 220-size films – Dimensions

• ISO 764 Horology – Magnetic resistant watches

• ISO 760:1978 Determination of water - Karl Fischer method (General method)

• ISO 787 General methods of test for pigments and extenders

• ISO 787-9:1981 Determination of pH value of an aqueous suspension

• ISO 838 Paper – Holes for general filing purposes – Specifications

• ISO 843:1997 Information and documentation – Conversion of Greek characters into Latin characters

• ISO 860 Terminology work – Harmonization of concepts and terms

• ISO 898 Mechanical properties of fasteners made of carbon steel and alloy steel.

• ISO 928 Spices and condiments - Determination of total ash

• ISO 936 Meat and meat products - Determination of total ash

• ISO 965 ISO general purpose metric screw threads – Tolerances

• ISO 999 Information and documentation – Guidelines for the content, organization, and presentation of indexes.

Back to list                                   Home                                  Continue

LIST OF INTERNATIONAL ORGANISATION OF STANDARDISATION (ISO) STANDARDS. (ISO 1-99)

INTRODUCTION

ISO stands for the International Standardisation Organisation which is an independent body for the development and publishing of International Standards. ISO is a network of the National Standards Institutes in more than 160+ countries with one member per country and a Central Secretariat in Geneva, Switzerland that coordinates the system. ISO is a Non-Government Organisation that forms a bridge between the Public and Private sectors for the development of standards and norms for different industries.

This blog post is a summary of all the standards that were published by the International Organisation of Standardisation.

SERIES FROM ISO 1 TO ISO 99

• ISO 1:2002 Geometrical Product Specifications (GPS) –Standard reference temperature for geometrical product specification and verification. 

• ISO 2:1973 Textiles – Designation of the direction of twist in yarns and related products. 

• ISO 3:1973 Preferred numbers – Series of preferred numbers. 

• ISO 4:1997 Information and documentation – Rules for the abbreviation of title words and titles of publications.

• ISO 5 Photography and graphic technology – Densitymeasurements.

• ISO 6:1993 Photography – Black-and-white pictorial still camera negative film/process systems – Determination of ISO speed.

• ISO 7 Pipe threads where pressure-tight joints are made on the threads.

• ISO 8:1977 Documentation – Presentation of periodicals. 

• ISO 9:1995 Information and documentation – Transliteration of Cyrillic characters into Latin characters – Slavic and non-Slavic languages. 

• ISO 11:1987 Aircraft – Ground pressure testing connections for pressure cabins. 

• ISO 12:1987 Aerospace – Pipelines – Identification. 

• ISO 14:1982 Straight-sided splines for cylindrical shafts with internal centering – Dimensions, tolerances and verification. 

• ISO 15:2011 Radial bearings—Boundary dimensions, general plan. 

• ISO 16:1975 Acoustics – Standard tuning frequency (Standard musical pitch). 

• ISO 17:1973 Guide to the use of preferred numbers and of series of preferred numbers. 

• ISO 18:1981 Documentation – Contents list of periodicals. 

• ISO 21:1985 Shipbuilding – Inland navigation – Cable-lifters for stud-link anchor chains. 

• ISO 22:1991 Belt drives – Flat transmission belts and corresponding pulleys – Dimensions and tolerances. 

• ISO 23:1993 Cinematography—Camera usage of 35 mm motion-picture film—Specifications. 

• ISO 25:1994 Cinematography—Camera usage of 16 mm motion-picture film—Specifications. 

• ISO 26:1993 Cinematography—Projector usage of 16 mm motion-picture films for direct front projection—Specifications. 

• ISO 28:1976 Cinematography—Camera usage of 8 mm Type R motion-picture film—Specifications. 

• ISO 29:1980 Cinematography—Projector usage of 8 mm Type R silent motion-picture film for direct front projection—Specifications [Withdrawn without replacement]. 

• ISO 31 Quantities and units [withdrawn: replaced with ISO/IEC 80000]. 

• ISO 32:1977 Gas cylinders for medical use—Marking for identification of content. 

• ISO 34 

• ISO 34-1:2010 Rubber, vulcanized or thermoplastic—Determination of tear strength—Part 1: Trouser, angle and crescent test pieces. 

• ISO 34-2:2011 Rubber, vulcanized or thermoplastic—Determination of tear strength—Part 2: Small (Delft) test pieces. 

• ISO 35:2004 Natural rubber latex concentrate—Determination of mechanical stability. 

• ISO 36:2011 Rubber, vulcanized or thermoplastic—Determination of adhesion to textile fabrics. 

• ISO 37:2011 Rubber, vulcanized or thermoplastic — Determination of tensile stress-strain properties. 

• ISO 41:1980 Shipbuilding—Inland vessels—Covers for deck openings for pumps [withdrawn without replacement]. 

• ISO 43:1976 Aircraft—Jacking pads. 

• ISO 44:1975 Aerospace—Lever-operated, two-position, ON/OFF switches—Directions of operation. 

• ISO 45:1990 Aircraft—Pressure refueling connections. 

• ISO 46:1973 Aircraft—Fuel nozzle grounding plugs and sockets. 

• ISO 48:2010 Rubber, vulcanized or thermoplastic—Determination of hardness (hardness between 10 IRHD and 100 IRHD). 

• ISO 49:1994 Malleable cast iron fittings threaded to ISO 7-1. 

• ISO 50:1977 Metal pipes—Steel sockets screwed according to ISO 7 [Withdrawn without replacement]. 

• ISO 53:1998 Cylindrical gears for general and heavy engineering—Standard basic rack tooth profile. 

• ISO 54:1996 Cylindrical gears for general engineering and for heavy engineering—Modules. 

• ISO 55:1977 Seedlac—Specification [Withdrawn without replacement]. 

• ISO 57:1975 Bleached lac—Specification [Withdrawn without replacement]. 

• ISO 60:1977 Plastics—Determination of apparent density of the material that can be poured from a specified funnel. 

• ISO 61:1976 Plastics—Determination of apparent density of molding material that cannot be poured from a specified funnel. 

• ISO 62:2008 Plastics—Determination of water absorption. 

• ISO 63:1975 Flat transmission belts—Lengths [Withdrawn: Replaced with ISO 22]. 

• ISO 65:1981 Carbon steel tubes suitable for screwing in accordance with ISO 7-1. 

• ISO 67:1981 Muscovite mica blocks, thins and films—Grading by size [Withdrawn without replacement]. 

• ISO 68 ISO general-purpose screw threads – Basic profile. 

• ISO 68-1:1998 Metric screw threads. 

• ISO 68-2:1998 Inch screw threads. 

• ISO 69:1998 Cinematography—16 mm motion-picture and magnetic film—Cutting and perforating dimensions. 

• ISO 70:1981 Cinematography—35 mm negative photographic sound record on 35 mm motion-picture film—Position and maximum width dimensions. 

• ISO 71:1977 Cinematography—16 mm negative photographic sound record on 16 mm, 35/16 mm and 35/32 mm motion-picture film—Positions and dimensions. 

• ISO 74:1976 Cinematography—Image area produced by camera aperture and maximum projectable image area on 8 mm Type R motion-picture film—Positions and dimensions. 

• ISO 75 Plastics—Determination of temperature of deflection under load. 

• ISO 75-1:2013 Plastics—Determination of temperature of deflection under load—Part 1: General test method. 

• ISO 75-2:2013 Plastics—Determination of temperature of deflection under load—Part 2: Plastics and ebonite. 

• ISO 75-3:2004 Plastics—Determination of temperature of deflection under load—Part 3: High-strength thermosetting laminates and long-fiber-reinforced plastics. 

• ISO 76:2006 Rolling bearings—Static load ratings. 

• ISO 78 Chemistry — Layouts for standards. 

• ISO 78-2:1999 Chemistry—Layouts for standards—Part 2: Methods of chemical analysis. 

• ISO 78-3:1983 Chemistry—Layouts for standards—Part 3: Standard for molecular absorption spectrometry. 

• ISO 78-4:1983 Layouts for standards—Part 4: Standard for atomic absorption spectrometric analysis. 

• ISO 82:1974 Steel—Tensile testing [Withdrawn: replaced with ISO 6892-1]. 

• ISO 83:1976 Steel—Charpy impact test (U-notch) [Withdrawn: replaced with ISO 148-1]. 

• ISO 86:1974 Steel—Tensile testing of sheet and strip less than 3 mm and not less than 0.5 mm thick [Withdrawn: replaced with ISO 6892-1]. 

• ISO 89:1974 Steel—Tensile testing of wire [Withdrawn: replaced with ISO 6892-1]. 

• ISO 90 Light gauge metal containers—Definitions and determination of dimensions and capacities. 

• ISO 90-1:1997 Light gauge metal containers—Definitions and determination of dimensions and capacities—Part 1: Open-top cans. 

• ISO 90-2:1997 Light gauge metal containers—Definitions and determination of dimensions and capacities—Part 2: General use containers. 

• ISO 90-3:2000 Light gauge metal containers—Definitions and determination of dimensions and capacities—Part 3: Aerosol cans. 

• ISO 91 Petroleum measurement tables. 

• ISO 91-1:1992 Petroleum measurement tables—Part 1: Tables based on reference temperatures of 15 degrees C and 60 degrees F. 

• ISO 91-2:1991 Petroleum measurement tables—Part 2: Tables based on a reference temperature of 20 degrees C. 

• ISO 92:1976 Textile machinery and accessories—Spinning machinery—Definition of side (left or right). 

• ISO 93 Textile machinery and accessories—Cylindrical sliver cans. 

• ISO 93-1:2006 Textile machinery and accessories—Cylindrical sliver cans—Part 1: Main dimensions. 

• ISO 93-2:2006 Textile machinery and accessories—Cylindrical sliver cans—Part 2: Spring bottoms. 

• ISO 94:1982 Textile machinery and accessories—Spindle gauges for ring-spinning and ring-doubling frames. 

• ISO 96 Textile machinery and accessories—Rings and travelers for ring spinning and ring twisting frames. 

• ISO 96-1:2009 Textile machinery and accessories—Rings and travelers for ring spinning and ring twisting frames—Part 1: Flange rings T and SF and their travelers. 

• ISO 96-2:2009 Textile machinery and accessories—Rings and travelers for ring spinning and ring twisting frames—Part 2: HZ- and J-rings and their travelers. 

• ISO 97:1975 Textile machinery and accessories—Rings for spinning, doubling and twisting for ear-shaped travelers. 

• ISO 98:2001 Textile machinery and accessories—Spinning preparatory and spinning machinery—Main dimensions of coverings for top rollers.

Back to list                                   Home                                  Continue