LIST OF INTERNATIONAL ORGANISATION OF STANDARDISATION (ISO) STANDARDS. (ISO 100-199)

SERIES FROM ISO 100 TO ISO 199

• ISO 100:1984 Pulleys for flat transmission belts—Crowns [Withdrawn: replaced with ISO 22]. 
• ISO 102:1990 Aircraft—Gravity filling orifices. 
• ISO 104:2002 Rolling bearings—Thrust bearings—Boundary dimensions, general plan. 
• ISO 105 Textiles — Tests for colour fastness. 
• ISO 105-A01:2010 Part A01: General principles of testing. 
• ISO 105-A02:1993 Part A02: Grey scale for assessing change in colour. 
• ISO 105-A03:1993 Part A03: Grey scale for assessing staining. 
• ISO 105-A04:1989 Part A04: Method for the instrumental assessment of the degree of staining of adjacent fabrics. 
• ISO 105-A05:1996 Part A05: Instrumental assessment of change in colour for determination of grey scale rating. 
• ISO 105-A06:1995 Part A06: Instrumental determination of 1/1 standard depth of colour. 
• ISO 105-A08:2001 Part A08: Vocabulary used in colour measurement. 
• ISO 105-A11:2012 Part A11: Determination of colour fastness grades by digital imaging techniques. 
• ISO 105-B01:1994 Part B01: Colour fastness to light: Daylight. 
• ISO 105-B02:2013 Part B02: Colour fastness to artificial light: Xenon arc fading lamp test. 
• ISO 105-B03:1994 Part B03: Colour fastness to weathering: Outdoor exposure. 
• ISO 105-B04:1994 Part B04: Colour fastness to artificial weathering: Xenon arc fading lamp test. 
• ISO 105-B05:1993 Part B05: Detection and assessment of photochromism. 
• ISO 105-B06:1998 Part B06: Colour fastness and ageing to artificial light at high temperatures: Xenon arc fading lamp test. 
• ISO 105-B07:2009 Part B07: Colour fastness to light of textiles wetted with artificial perspiration. 
• ISO 105-B08:1995 Part B08: Quality control of blue wool reference materials 1 to 7. 
• ISO 105-B10:2011 Part B10: Artificial weathering—Exposure to filtered xenon-arc radiation. 
• ISO 105-C06:2010 Part C06: Colour fastness to domestic and commercial laundering. 
• ISO 105-C07:1999 Part C07: Colour fastness to wet scrubbing of pigment printed textiles. 
• ISO 105-C08:2010 Part C08: Colour fastness to domestic and commercial laundering using a non-phosphate reference detergent incorporating a low-temperature bleach activator. 
• ISO 105-C09:2001 Part C09: Colour fastness to domestic and commercial laundering—Oxidative bleach response using a non-phosphate reference detergent incorporating a low temperature bleach activator. 
• ISO 105-C10:2006 Part C10: Colour fastness to washing with soap or soap and soda. 
• ISO 105-C12:2004 Part C12: Colour fastness to industrial laundering. 
• ISO 105-D01:2010 Part D01: Colour fastness to dry cleaning using perchloroethylene solvent. 
• ISO 105-D02:1993 Part D02: Colour fastness to rubbing: Organic solvents. 
• ISO 105-E01:2013 Part E01: Colour fastness to water. 
• ISO 105-E02:2013 Part E02: Colour fastness to seawater. 
• ISO 105-E03:2010 Part E03: Colour fastness to chlorinated water (swimming-pool water). 
• ISO 105-E04:2013 Part E04: Colour fastness to perspiration. 
• ISO 105-E05:2010 Part E05: Colour fastness to spotting: Acid. 
• ISO 105-E06:2006 Part E06: Colour fastness to spotting: Alkali. 
• ISO 105-E07:2010 Part E07: Colour fastness to spotting: Water. 
• ISO 105-E08:1994 Part E08: Colour fastness to hot water. 
• ISO 105-E09:2010 Part E09: Colour fastness to potting. 
• ISO 105-E10:1994 Part E10: Colour fastness to decatizing. 
• ISO 105-E11:1994 Part E11: Colour fastness to steaming. 
• ISO 105-E12:2010 Part E12: Colour fastness to milling: Alkaline milling. 
• ISO 105-E13:1994 Part E13: Colour fastness to acid-felting: Severe. 
• ISO 105-E14:1994 Part E14: Colour fastness to acid-felting: Mild. 
• ISO 105-E16:2006 Part E16: Colour fastness to water spotting on upholstery fabrics. 
• ISO 105-F01:2001 Part F01: Specification for wool adjacent fabric. 
• ISO 105-F02:2009 Part F02: Specification for cotton and viscose adjacent fabrics. 
• ISO 105-F03:2001 Part F03: Specification for polyamide adjacent fabric. 
• ISO 105-F04:2001 Part F04: Specification for polyester adjacent fabric. 
• ISO 105-F05:2001 Part F05: Specification for acrylic adjacent fabric. 
• ISO 105-F06:2000 Part F06: Specification for silk adjacent fabric. 
• ISO 105-F07:2001 Part F07: Specification for secondary acetate adjacent fabric. 
• ISO 105-F09:2009 Part F09: Specification for cotton rubbing cloth. 
• ISO 105-F10:1989 Part F10: Specification for adjacent fabric: Multifibre. 
• ISO 105-G01:1993 Part G01: Colour fastness to nitrogen oxides. 
• ISO 105-G02:1993 Part G02: Colour fastness to burnt-gas fumes. 
• ISO 105-G03:1993 Part G03: Colour fastness to ozone in the atmosphere. 
• ISO 105-G04:1989 Part G04: Colour fastness to oxides of nitrogen in the atmosphere at high humidities. 
• ISO 105-J01:1997 Part J01: General principles for measurement of surface colour. 
• ISO 105-J02:1997 Part J02: Instrumental assessment of relative whiteness. 
• ISO 105-J03:2009 Part J03: Calculation of colour differences. 
• ISO 105-J05:2007 Part J05: Method for the instrumental assessment of the colour inconstancy of a specimen with change in illuminant (CMCCON02). 
• ISO 105-N01:1993 Part N01: Colour fastness to bleaching: Hypochlorite. 
• ISO 105-N02:1993 Part N02: Colour fastness to bleaching: Peroxide. 
• ISO 105-N03:1993 Part N03: Colour fastness to bleaching: Sodium chlorite (mild). 
• ISO 105-N04:1993 Part N04: Colour fastness to bleaching: Sodium chlorite (severe). 
• ISO 105-N05:1993 Part N05: Colour fastness to stoving. 
• ISO 105-P01:1993 Part P01: Colour fastness to dry heat (excluding pressing). 
• ISO 105-P02:2002 Part P02: Colour fastness to pleating: Steam pleating. 
• ISO 105-S01:1993 Part S01: Colour fastness to vulcanization: Hot air. 
• ISO 105-S02:1993 Part S02: Colour fastness to vulcanization: Sulfur monochloride. 
• ISO 105-S03:1993 Part S03: Colour fastness to vulcanization: Open steam. 
• ISO 105-X01:1993 Part X01: Colour fastness to carbonizing: Aluminium chloride. 
• ISO 105-X02:1993 Part X02: Colour fastness to carbonizing: Sulfuric acid. 
• ISO 105-X04:1994 Part X04: Colour fastness to mercerizing. 
• ISO 105-X05:1994 Part X05: Colour fastness to organic solvents. 
• ISO 105-X06:1994 Part X06: Colour fastness to soda boiling. 
• ISO 105-X07:1994 Part X07: Colour fastness to cross-dyeing: Wool. 
• ISO 105-X08:1994 Part X08: Colour fastness to degumming. 
• ISO 105-X09:1993 Part X09: Colour fastness to formaldehyde. 
• ISO 105-X10:1993 Part X10: Assessment of migration of textile colours into polyvinyl chloride coatings. 
• ISO 105-X11:1994 Part X11: Colour fastness to hot pressing. 
• ISO 105-X12:2001 Part X12: Colour fastness to rubbing. 
• ISO 105-X 13:1994 Part X13: Colour fastness of wool dyes to processes using chemical means for creasing, pleating and setting. 
• ISO 105-X14:1994 Part X14: Colour fastness to acid chlorination of wool: Sodium dichloroisocyanurate. 
• ISO 105-X16:2001 Part X16: Colour fastness to rubbing—Small areas. 
• ISO 105-X18:2007 Part X18: Assessment of the potential to phenolic yellowing of materials. 
• ISO 105-Z01:1993 Part Z01: Colour fastness to metals in the dye-bath: Chromium salts. 
• ISO 105-Z02:1993 Part Z02: Colour fastness to metals in the dye-bath: Iron and copper. 
• ISO 105-Z03:1996 Part Z03: Intercompatibility of basic dyes for acrylic fibres. 
• ISO 105-Z04:1995 Part Z04: Dispersibility of disperse dyes. 
• ISO 105-Z05:1996 Part Z05: Determination of the dusting behaviour of dyes. 
• ISO 105-Z06:1998 Part Z06: Evaluation of dye and pigment migration. 
• ISO 105-Z07:1995 Part Z07: Determination of application solubility and solution stability of water-soluble dyes. 
• ISO 105-Z08:1995 Part Z08: Determination of solubility and solution stability of reactive dyes in the presence of electrolytes. 
• ISO 105-Z09:1995 Part Z09: Determination of cold water solubility of water-soluble dyes. 
• ISO 105-Z10:1997 Part Z10: Determination of relative colour strength of dyes in solution 
• ISO 105-Z11:1998 Part Z11: Evaluation of speckiness of colorant dispersions. 
• ISO 108:1976 Textile machinery and accessories—Weaving looms—Definition of left and right sides. 
• ISO 109:1982 Textile machinery—Working widths of weaving machines. 
• ISO 110:1978 Textile machinery and accessories—Cones for yarn winding (cross wound) -- Half angle of the cone 9 degrees 15' [Withdrawn without replacement]. 
• ISO 111:1978 Textile machinery and accessories—Cones for yarn winding (cross wound) -- Half angle of the cone 4 degrees 20' [Withdrawn: Replaced with ISO 8489-3]. 
• ISO 112:1983 Textile machinery and accessories—Cones for yarn winding (cross wound) -- Half angle of the cone 3 degrees 30' [Withdrawn: Replaced with ISO 8489-2]. 
• ISO 113:2010 Rolling bearings—Plummer block housings—Boundary dimensions. 
• ISO 114:1980 99.8 Unalloyed magnesium ingots—Chemical composition [Withdrawn: Replaced by ISO 8287]. 
• ISO 115:2003 Unalloyed aluminium ingots for remelting—Classification and composition. 
• ISO 119:1977 Plastics—Phenol-formaldehyde mouldings—Determination of free phenols—Iodometric method. 
• ISO 120:1977 Plastics—Phenol-formaldehyde mouldings—Determination of free ammonia and ammonium compounds—Colorimetric comparison method. 
• ISO 121:1980 Magnesium-aluminium-zinc alloy ingots and alloy castings—Chemical composition and mechanical properties of sand cast reference test bars [Withdrawn: replaced by ISO 16220]. 
• ISO 123:2001 Rubber latex—Sampling. 
• ISO 124:2011 Latex, rubber—Determination of total solids content. 
• ISO 125:2011 Natural rubber latex concentrate—Determination of alkalinity. 
• ISO 126:2005 Natural rubber latex concentrate—Determination of dry rubber content. 
• ISO 127:2012 Rubber, natural latex concentrate—Determination of KOH number. 
• ISO 128 Technical drawings—General principles of presentation. 
• ISO 129 
• ISO 129-1:2004 Technical drawings—Indication of dimensions and tolerances—Part 1: General principles. 
• ISO 129-4:2013 Technical product documentation (TPD) -- Indication of dimensions and tolerances—Part 4: Dimensioning of shipbuilding drawings. 
• ISO 131:1979 Acoustics—Expression of physical and subjective magnitudes of sound or noise in air [Withdrawn without replacement]. 
• ISO 132:2011 Rubber, vulcanized or thermoplastic—Determination of flex cracking and crack growth (De Mattia). 
• ISO 133:1983 Rubber, vulcanized—Determination of crack growth (De Mattia) [Withdrawn: Replaced with ISO 132]. 
• ISO 136:1972 Steel—Simple torsion testing of wire [Withdrawn replaced by ISO 7800]. 
• ISO 137:1975 Wool—Determination of fibre diameter—Projection microscope method. 
• ISO 139:2005 Textiles—Standard atmospheres for conditioning and testing. 
• ISO 140 Acoustics—Measurement of sound insulation in buildings and of building elements. 
• ISO 140-2:1991 Part 2: Determination, verification and application of precision data. 
• ISO 140-4:1998 Part 4: Field measurements of airborne sound insulation between rooms. 
• ISO 140-5:1998 Part 5: Field measurements of airborne sound insulation of façade elements and façades. 
• ISO 140-7:1998 Part 7: Field measurements of impact sound insulation of floors. 
• ISO 140-14:2004 Part 14: Guidelines for special situations in the field. 
• ISO 140-18:2006 Part 18: Laboratory measurement of sound generated by rainfall on building elements. 
• ISO 141:1976 Textile machinery and accessories—Pirn winders and cross winders—Definition of left and right sides. 
• ISO 142:1976 Textile machinery and accessories—Weaving preparatory machines—Definition of left and right sides. 
• ISO 143:1977 Textile machinery and accessories—Weft pirns for automatic looms [Withdrawn without replacement]. 
• ISO 144:1973 Steel—Reverse bend testing of wire [Withdrawn: replaced with ISO 7801]. 
• ISO 146:1984 Metallic materials—Hardness test—Verification of Vickers hardness testing machines HV 0,2 to HV 100 [Withdrawn replaced with ISO 6507-2]. 
• ISO 146-2:1993 Metallic materials—Verification of Vickers hardness testing machines—Part 2: Less than HV 0,2 [Withdrawn replaced with ISO 6507-2]. 
• ISO 148 Metallic materials—Charpy pendulum impact test. 
• ISO 148-1:2009 Part 1: Test method. 
• ISO 148-2:2008 Part 2: Verification of testing machines. 
• ISO 148-3:2008 Part 3: Preparation and characterization of Charpy V-notch test pieces for indirect verification of pendulum impact machines. 
• ISO 150:2006 Raw, refined and boiled linseed oil for paints and varnishes—Specifications and methods of test. 
• ISO 155:1998 Belt drives—Pulleys—Limiting values for adjustment of centres. 
• ISO 156:1982 Metallic materials—Hardness test—Verification of Brinell hardness testing machines [Withdrawn replaced by ISO 6506-2]. 
• ISO 157:1996 Coal—Determination of forms of sulfur. 
• ISO 160:1980 Asbestos-cement pressure pipes and joints [Withdrawn without replacement]. 
• ISO 161 Thermoplastics pipes for the conveyance of fluids—Nominal outside diameters and nominal pressures. 
• ISO 161-1:1996 Part 1: Metric series. 
• ISO 161-2:1996 Part 2: Inch-based series. 
• ISO 162:1985 Cinematography—Head gaps and sound records for three-, four-, or six-track magnetic sound records on 35 mm and single-track on 17,5 mm motion-picture film containing no picture—Positions and width dimensions. 
• ISO 171:1980 Plastics—Determination of bulk factor of moulding materials. 
• ISO 172:1978 Plastics—Phenol-formaldehyde mouldings—Detection of free ammonia. 
• ISO 174:1974 Plastics—Homopolymer and copolymer resins of vinyl chloride—Determination of viscosity number in dilute solution [Withdrawn replaced by ISO 1628-2].

 

Back to list                                   Home                                  Continue