Showing posts with label ISO 9001. Show all posts
Showing posts with label ISO 9001. Show all posts
Monday, December 7, 2020
LIST OF INTERNATIONAL ORGANISATION OF STANDARDISATION (ISO) STANDARDS. (1000-4999)
LIST OF INTERNATIONAL ORGANISATION OF STANDARDISATION (ISO) STANDARDS. (ISO 5000 - 8999)
ISO CODES FROM ISO 5000 - 8999
- ISO 5127 Information and documentation – Vocabulary.
- ISO 5167 Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full.
- ISO 5167-1 General principles and requirements.
- ISO 5167-2 Orifice plates.
- ISO 5167-3 Nozzles and Venturi nozzles.
- ISO 5167-4 Venturi tubes.
- ISO/IEC 5218 Information technology – Codes for the representation of human sexes.
- ISO 5455 Technical drawings – Scales.
- ISO 5457 Technical product documentation – Sizes and layout of drawing sheets.
- ISO 5458 Geometrical Product Specifications (GPS) – Geometrical tolerancing – Positional tolerancing.
- ISO 5459 Geometrical product specifications (GPS) – Geometrical tolerancing – Datums and datum systems.
- ISO 5660 Reaction-to-fire tests – Heat release, smoke production and mass loss rate.
- ISO 5660-1 Heat release rate (cone calorimeter method).
- ISO 5660-2 Smoke production rate (dynamic measurement).
- ISO/TS 5660-3 Guidance on measurement.
- ISO 5725 Accuracy (trueness and precision) of measurement methods and results.
- ISO 5775 Bicycle tires and rims.
- ISO 5776 Graphic technology - Symbols for text correction
- ISO 5800:2001 Photography – Colour negative films for still photography – Determination of ISO speed
- ISO 5893 Rubber and plastics test equipment – Tensile, flexural and compression types (constant rate of traverse) – Specification
- ISO 5964 Documentation – Guidelines for the establishment and development of multilingual thesauri
- ISO 5971:1981 Size designation of clothes – Pantyhose
- ISO 5993 Sodium hydroxide for industrial use—Determination of mercury content—Flameless atomic absorption spectrometric method
- ISO 6107-4:1993 Water quality—Vocabulary
- ISO 6166 Securities and related financial instruments – International securities identification numbering system (ISIN)
- ISO 6194 Rotary-shaft lip-type seals incorporating elastomeric sealing elements
- ISO 6194-5 Identification of visual imperfections
- ISO 6336 Calculation of load capacity of spur and helical gears
- ISO 6344 Coated abrasives – Grain size analysis
- ISO 6346 Freight containers – Coding, identification and marking
- ISO 6357 Documentation – Spine titles on books and other publications
- ISO/IEC 6429 Information technology – Control functions for coded character sets
- ISO 6438 Documentation – African coded character set for bibliographic information interchange
- ISO/IEC 6523 Information technology – Structure for the identification of organizations and organization parts
- ISO 6579 Microbiology of food and animal feeding stuffs – Horizontal method for the detection of Salmonella spp.
- ISO 6594 Cast iron drainage pipes and fittings – Spigot series
- ISO 6709 Standard representation of geographic point location by coordinates
- ISO 6780 Flat pallets for intercontinental materials handling — Principal dimensions and tolerances
- ISO 6892 Metallic materials – Tensile testing
- ISO 6892-1 Method of test at room temperature
- ISO 6892-2 Method of test at elevated temperature
- ISO 6892-3 Method of test at low temperature
- ISO 6892-4 Method of test in liquid helium
- ISO 6946 Building components and building elements – Thermal resistance and thermal transmittance – Calculation method
- ISO 7001 Graphical symbols – Public information symbols
- ISO 7002 Agricultural food products – Layout for a standard method of sampling from a lot
- ISO 7098 Information and documentation – Romanization of Chinese
- ISO 7200 Technical product documentation – Data fields in title blocks and document headers
- ISO 7240 Fire detection and alarm systems
- ISO 7372 Trade data interchange
- ISO/IEC 7498 Information technology -- Open Systems Interconnection — Basic Reference Model
- ISO/IEC 7498-1 Information technology—Open Systems Interconnection—Basic Reference Model: The Basic Model
- ISO 7498-2 Information processing systems—Open Systems Interconnection—Basic Reference Model—Part 2: Security Architecture
- ISO/IEC 7498-3 Information technology—Open Systems Interconnection—Basic Reference Model: Naming and addressing
- ISO/IEC 7501 Identification cards – Machine readable travel documents
- ISO/IEC 7501-1:2008 Machine readable passport
- ISO/IEC 7501-2:1997 Machine readable visa
- ISO/IEC 7501-3:2005 Machine readable official travel documents
- ISO 7736 Road vehicles – Car radio for front installation – Installation space including connections
- ISO/IEC 7810 Identification cards – Physical characteristics
- ISO/IEC 7811 Identification cards – Recording technique
- ISO/IEC 7812 Identification cards – Identification of issuers
- ISO/IEC 7813 Information technology – Identification cards – Financial transaction cards
- ISO/IEC 7816 Identification cards – Integrated circuit cards
- ISO/IEC 7942 Information technology – Computer graphics and image processing – Graphical Kernel System (GKS)
- ISO 8000 Data quality
- ISO 8015:2011 Geometrical product specifications (GPS) – Fundamentals – Concepts, principles and rules
- ISO 8090 Cycles – Terminology
- ISO 8180 Ductile iron pipelines – Polyethylene sleeving for site application
- ISO 8373 Manipulating industrial robots – Vocabulary
- ISO 8501 Preparation of steel substrates before application of paints and related products – Visual assessment of surface cleanliness
- ISO 8559:1989 Garment construction and anthropometric surveys – Body dimensions
- ISO 8573 Compressed air
- ISO 8573-1 Contaminant and purity classes
- ISO 8573-2 Test methods for oil aerosol content
- ISO 8573-3 Test methods for measurement of humidity
- ISO 8573-4 Test methods for solid particle content
- ISO 8573-5 Test methods for oil vapour and organic solvent content
- ISO 8573-6 Test methods for gaseous contaminant content
- ISO 8573-7 Test method for viable microbiological contaminant content
- ISO 8573-8 Test methods for solid particle content by mass concentration
- ISO 8573-9 Test methods for liquid water content
- ISO 8583 Financial transaction card originated messages – Interchange message specifications
- ISO 8583-1 Message, data elements and code values
- ISO 8583-2 Application and registration procedures for Institution Identification Codes (IIC)
- ISO 8583-3 Maintenance procedures for messages, data elements, and code values
- ISO 8601 Data elements and interchange formats – Information interchange – Representation of dates and times
- ISO/IEC 8613 Information technology – Open Document Architecture (ODA) and interchange format
- ISO/IEC 8632 Information technology – Computer graphics – Metafile for the storage and transfer of picture description information
- ISO/IEC 8632-1 Functional specification
- ISO/IEC 8632-2 Character encoding
- ISO/IEC 8632-3 Binary encoding [withdrawn 2001-06-21]
- ISO/IEC 8632-4 Clear text encoding
- ISO 8651 Information technology – Computer graphics – Graphical Kernel System (GKS) language bindings[Note 3]
- ISO/IEC 8652 Information technology – Programming languages – Ada
- ISO 8653:1986 Jewellery – Ring-sizes – Definition, measurement and designation
- ISO 8691 Petroleum products – Low levels of vanadium in liquid fuels – Determination by flameless atomic absorption spectrometry after ashing
- ISO 8805 Information processing systems – Computer graphics – Graphical Kernel System for Three Dimensions (GKS-3D) functional description
- ISO/IEEC 8806 Information technology – Computer graphics – Graphical Kernel System for Three Dimensions (GKS-3D) language bindings
- ISO/IEEC 8806-4 C
- ISO 8807 Information processing systems – Open Systems Interconnection – LOTOS – A formal description technique based on the temporal ordering of observational behavior.
- ISO/IEC 8824 Information technology – Abstract Syntax Notation One (ASN.1)
- ISO/IEC 8825 Information technology – ASN.1 encoding rules
- ISO/IEC 8859 Information technology – 8-bit single-byte coded graphic character sets
- ISO/IEC 8859-1 Latin alphabet No. 1
- ISO/IEC 8859-2 Latin alphabet No. 2
- ISO/IEC 8859-3 Latin alphabet No. 3
- ISO/IEC 8859-4 Latin alphabet No. 4
- ISO/IEC 8859-5 Latin/Cyrillic alphabet
- ISO/IEC 8859-6 Latin/Arabic alphabet
- ISO/IEC 8859-7 Latin/Greek alphabet
- ISO/IEC 8859-8 Latin/Hebrew alphabet
- ISO/IEC 8859-9 Latin alphabet No. 5
- ISO/IEC 8859-10 Latin alphabet No. 6
- ISO/IEC 8859-11 Latin/Thai alphabet
- ISO/IEC 8859-13 Latin alphabet No. 7
- ISO/IEC 8859-14 Latin alphabet No. 8 (Celtic)
- ISO/IEC 8859-15 Latin alphabet No. 9
- ISO/IEC 8859-16 Latin alphabet No. 10
- ISO 8879 Information processing – Text and office systems – Standard Generalized Markup Language (SGML)
- ISO 5127 Information and documentation – Vocabulary.
- ISO 5167 Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full.
- ISO 5167-1 General principles and requirements.
- ISO 5167-2 Orifice plates.
- ISO 5167-3 Nozzles and Venturi nozzles.
- ISO 5167-4 Venturi tubes.
- ISO/IEC 5218 Information technology – Codes for the representation of human sexes.
- ISO 5455 Technical drawings – Scales.
- ISO 5457 Technical product documentation – Sizes and layout of drawing sheets.
- ISO 5458 Geometrical Product Specifications (GPS) – Geometrical tolerancing – Positional tolerancing.
- ISO 5459 Geometrical product specifications (GPS) – Geometrical tolerancing – Datums and datum systems.
- ISO 5660 Reaction-to-fire tests – Heat release, smoke production and mass loss rate.
- ISO 5660-1 Heat release rate (cone calorimeter method).
- ISO 5660-2 Smoke production rate (dynamic measurement).
- ISO/TS 5660-3 Guidance on measurement.
- ISO 5725 Accuracy (trueness and precision) of measurement methods and results.
- ISO 5775 Bicycle tires and rims.
- ISO 5776 Graphic technology - Symbols for text correction
- ISO 5800:2001 Photography – Colour negative films for still photography – Determination of ISO speed
- ISO 5893 Rubber and plastics test equipment – Tensile, flexural and compression types (constant rate of traverse) – Specification
- ISO 5964 Documentation – Guidelines for the establishment and development of multilingual thesauri
- ISO 5971:1981 Size designation of clothes – Pantyhose
- ISO 5993 Sodium hydroxide for industrial use—Determination of mercury content—Flameless atomic absorption spectrometric method
- ISO 6107-4:1993 Water quality—Vocabulary
- ISO 6166 Securities and related financial instruments – International securities identification numbering system (ISIN)
- ISO 6194 Rotary-shaft lip-type seals incorporating elastomeric sealing elements
- ISO 6194-5 Identification of visual imperfections
- ISO 6336 Calculation of load capacity of spur and helical gears
- ISO 6344 Coated abrasives – Grain size analysis
- ISO 6346 Freight containers – Coding, identification and marking
- ISO 6357 Documentation – Spine titles on books and other publications
- ISO/IEC 6429 Information technology – Control functions for coded character sets
- ISO 6438 Documentation – African coded character set for bibliographic information interchange
- ISO/IEC 6523 Information technology – Structure for the identification of organizations and organization parts
- ISO 6579 Microbiology of food and animal feeding stuffs – Horizontal method for the detection of Salmonella spp.
- ISO 6594 Cast iron drainage pipes and fittings – Spigot series
- ISO 6709 Standard representation of geographic point location by coordinates
- ISO 6780 Flat pallets for intercontinental materials handling — Principal dimensions and tolerances
- ISO 6892 Metallic materials – Tensile testing
- ISO 6892-1 Method of test at room temperature
- ISO 6892-2 Method of test at elevated temperature
- ISO 6892-3 Method of test at low temperature
- ISO 6892-4 Method of test in liquid helium
- ISO 6946 Building components and building elements – Thermal resistance and thermal transmittance – Calculation method
- ISO 7001 Graphical symbols – Public information symbols
- ISO 7002 Agricultural food products – Layout for a standard method of sampling from a lot
- ISO 7098 Information and documentation – Romanization of Chinese
- ISO 7200 Technical product documentation – Data fields in title blocks and document headers
- ISO 7240 Fire detection and alarm systems
- ISO 7372 Trade data interchange
- ISO/IEC 7498 Information technology -- Open Systems Interconnection — Basic Reference Model
- ISO/IEC 7498-1 Information technology—Open Systems Interconnection—Basic Reference Model: The Basic Model
- ISO 7498-2 Information processing systems—Open Systems Interconnection—Basic Reference Model—Part 2: Security Architecture
- ISO/IEC 7498-3 Information technology—Open Systems Interconnection—Basic Reference Model: Naming and addressing
- ISO/IEC 7501 Identification cards – Machine readable travel documents
- ISO/IEC 7501-1:2008 Machine readable passport
- ISO/IEC 7501-2:1997 Machine readable visa
- ISO/IEC 7501-3:2005 Machine readable official travel documents
- ISO 7736 Road vehicles – Car radio for front installation – Installation space including connections
- ISO/IEC 7810 Identification cards – Physical characteristics
- ISO/IEC 7811 Identification cards – Recording technique
- ISO/IEC 7812 Identification cards – Identification of issuers
- ISO/IEC 7813 Information technology – Identification cards – Financial transaction cards
- ISO/IEC 7816 Identification cards – Integrated circuit cards
- ISO/IEC 7942 Information technology – Computer graphics and image processing – Graphical Kernel System (GKS)
- ISO 8000 Data quality
- ISO 8015:2011 Geometrical product specifications (GPS) – Fundamentals – Concepts, principles and rules
- ISO 8090 Cycles – Terminology
- ISO 8180 Ductile iron pipelines – Polyethylene sleeving for site application
- ISO 8373 Manipulating industrial robots – Vocabulary
- ISO 8501 Preparation of steel substrates before application of paints and related products – Visual assessment of surface cleanliness
- ISO 8559:1989 Garment construction and anthropometric surveys – Body dimensions
- ISO 8573 Compressed air
- ISO 8573-1 Contaminant and purity classes
- ISO 8573-2 Test methods for oil aerosol content
- ISO 8573-3 Test methods for measurement of humidity
- ISO 8573-4 Test methods for solid particle content
- ISO 8573-5 Test methods for oil vapour and organic solvent content
- ISO 8573-6 Test methods for gaseous contaminant content
- ISO 8573-7 Test method for viable microbiological contaminant content
- ISO 8573-8 Test methods for solid particle content by mass concentration
- ISO 8573-9 Test methods for liquid water content
- ISO 8583 Financial transaction card originated messages – Interchange message specifications
- ISO 8583-1 Message, data elements and code values
- ISO 8583-2 Application and registration procedures for Institution Identification Codes (IIC)
- ISO 8583-3 Maintenance procedures for messages, data elements, and code values
- ISO 8601 Data elements and interchange formats – Information interchange – Representation of dates and times
- ISO/IEC 8613 Information technology – Open Document Architecture (ODA) and interchange format
- ISO/IEC 8632 Information technology – Computer graphics – Metafile for the storage and transfer of picture description information
- ISO/IEC 8632-1 Functional specification
- ISO/IEC 8632-2 Character encoding
- ISO/IEC 8632-3 Binary encoding [withdrawn 2001-06-21]
- ISO/IEC 8632-4 Clear text encoding
- ISO 8651 Information technology – Computer graphics – Graphical Kernel System (GKS) language bindings[Note 3]
- ISO/IEC 8652 Information technology – Programming languages – Ada
- ISO 8653:1986 Jewellery – Ring-sizes – Definition, measurement and designation
- ISO 8691 Petroleum products – Low levels of vanadium in liquid fuels – Determination by flameless atomic absorption spectrometry after ashing
- ISO 8805 Information processing systems – Computer graphics – Graphical Kernel System for Three Dimensions (GKS-3D) functional description
- ISO/IEEC 8806 Information technology – Computer graphics – Graphical Kernel System for Three Dimensions (GKS-3D) language bindings
- ISO/IEEC 8806-4 C
- ISO 8807 Information processing systems – Open Systems Interconnection – LOTOS – A formal description technique based on the temporal ordering of observational behavior.
- ISO/IEC 8824 Information technology – Abstract Syntax Notation One (ASN.1)
- ISO/IEC 8825 Information technology – ASN.1 encoding rules
- ISO/IEC 8859 Information technology – 8-bit single-byte coded graphic character sets
- ISO/IEC 8859-1 Latin alphabet No. 1
- ISO/IEC 8859-2 Latin alphabet No. 2
- ISO/IEC 8859-3 Latin alphabet No. 3
- ISO/IEC 8859-4 Latin alphabet No. 4
- ISO/IEC 8859-5 Latin/Cyrillic alphabet
- ISO/IEC 8859-6 Latin/Arabic alphabet
- ISO/IEC 8859-7 Latin/Greek alphabet
- ISO/IEC 8859-8 Latin/Hebrew alphabet
- ISO/IEC 8859-9 Latin alphabet No. 5
- ISO/IEC 8859-10 Latin alphabet No. 6
- ISO/IEC 8859-11 Latin/Thai alphabet
- ISO/IEC 8859-13 Latin alphabet No. 7
- ISO/IEC 8859-14 Latin alphabet No. 8 (Celtic)
- ISO/IEC 8859-15 Latin alphabet No. 9
- ISO/IEC 8859-16 Latin alphabet No. 10
- ISO 8879 Information processing – Text and office systems – Standard Generalized Markup Language (SGML)
Back to list Home
Monday, November 2, 2020
LIST OF INTERNATIONAL ORGANISATION OF STANDARDISATION (ISO) STANDARDS. (ISO 100-199)
SERIES FROM ISO 100 TO ISO 199
- ISO 100:1984 Pulleys for flat transmission belts—Crowns [Withdrawn: replaced with ISO 22].
- ISO 102:1990 Aircraft—Gravity filling orifices.
- ISO 104:2002 Rolling bearings—Thrust bearings—Boundary dimensions, general plan.
- ISO 105 Textiles — Tests for colour fastness.
- ISO 105-A01:2010 Part A01: General principles of testing.
- ISO 105-A02:1993 Part A02: Grey scale for assessing change in colour.
- ISO 105-A03:1993 Part A03: Grey scale for assessing staining.
- ISO 105-A04:1989 Part A04: Method for the instrumental assessment of the degree of staining of adjacent fabrics.
- ISO 105-A05:1996 Part A05: Instrumental assessment of change in colour for determination of grey scale rating.
- ISO 105-A06:1995 Part A06: Instrumental determination of 1/1 standard depth of colour.
- ISO 105-A08:2001 Part A08: Vocabulary used in colour measurement.
- ISO 105-A11:2012 Part A11: Determination of colour fastness grades by digital imaging techniques.
- ISO 105-B01:1994 Part B01: Colour fastness to light: Daylight.
- ISO 105-B02:2013 Part B02: Colour fastness to artificial light: Xenon arc fading lamp test.
- ISO 105-B03:1994 Part B03: Colour fastness to weathering: Outdoor exposure.
- ISO 105-B04:1994 Part B04: Colour fastness to artificial weathering: Xenon arc fading lamp test.
- ISO 105-B05:1993 Part B05: Detection and assessment of photochromism.
- ISO 105-B06:1998 Part B06: Colour fastness and ageing to artificial light at high temperatures: Xenon arc fading lamp test.
- ISO 105-B07:2009 Part B07: Colour fastness to light of textiles wetted with artificial perspiration.
- ISO 105-B08:1995 Part B08: Quality control of blue wool reference materials 1 to 7.
- ISO 105-B10:2011 Part B10: Artificial weathering—Exposure to filtered xenon-arc radiation.
- ISO 105-C06:2010 Part C06: Colour fastness to domestic and commercial laundering.
- ISO 105-C07:1999 Part C07: Colour fastness to wet scrubbing of pigment printed textiles.
- ISO 105-C08:2010 Part C08: Colour fastness to domestic and commercial laundering using a non-phosphate reference detergent incorporating a low-temperature bleach activator.
- ISO 105-C09:2001 Part C09: Colour fastness to domestic and commercial laundering—Oxidative bleach response using a non-phosphate reference detergent incorporating a low temperature bleach activator.
- ISO 105-C10:2006 Part C10: Colour fastness to washing with soap or soap and soda.
- ISO 105-C12:2004 Part C12: Colour fastness to industrial laundering.
- ISO 105-D01:2010 Part D01: Colour fastness to dry cleaning using perchloroethylene solvent.
- ISO 105-D02:1993 Part D02: Colour fastness to rubbing: Organic solvents.
- ISO 105-E01:2013 Part E01: Colour fastness to water.
- ISO 105-E02:2013 Part E02: Colour fastness to seawater.
- ISO 105-E03:2010 Part E03: Colour fastness to chlorinated water (swimming-pool water).
- ISO 105-E04:2013 Part E04: Colour fastness to perspiration.
- ISO 105-E05:2010 Part E05: Colour fastness to spotting: Acid.
- ISO 105-E06:2006 Part E06: Colour fastness to spotting: Alkali.
- ISO 105-E07:2010 Part E07: Colour fastness to spotting: Water.
- ISO 105-E08:1994 Part E08: Colour fastness to hot water.
- ISO 105-E09:2010 Part E09: Colour fastness to potting.
- ISO 105-E10:1994 Part E10: Colour fastness to decatizing.
- ISO 105-E11:1994 Part E11: Colour fastness to steaming.
- ISO 105-E12:2010 Part E12: Colour fastness to milling: Alkaline milling.
- ISO 105-E13:1994 Part E13: Colour fastness to acid-felting: Severe.
- ISO 105-E14:1994 Part E14: Colour fastness to acid-felting: Mild.
- ISO 105-E16:2006 Part E16: Colour fastness to water spotting on upholstery fabrics.
- ISO 105-F01:2001 Part F01: Specification for wool adjacent fabric.
- ISO 105-F02:2009 Part F02: Specification for cotton and viscose adjacent fabrics.
- ISO 105-F03:2001 Part F03: Specification for polyamide adjacent fabric.
- ISO 105-F04:2001 Part F04: Specification for polyester adjacent fabric.
- ISO 105-F05:2001 Part F05: Specification for acrylic adjacent fabric.
- ISO 105-F06:2000 Part F06: Specification for silk adjacent fabric.
- ISO 105-F07:2001 Part F07: Specification for secondary acetate adjacent fabric.
- ISO 105-F09:2009 Part F09: Specification for cotton rubbing cloth.
- ISO 105-F10:1989 Part F10: Specification for adjacent fabric: Multifibre.
- ISO 105-G01:1993 Part G01: Colour fastness to nitrogen oxides.
- ISO 105-G02:1993 Part G02: Colour fastness to burnt-gas fumes.
- ISO 105-G03:1993 Part G03: Colour fastness to ozone in the atmosphere.
- ISO 105-G04:1989 Part G04: Colour fastness to oxides of nitrogen in the atmosphere at high humidities.
- ISO 105-J01:1997 Part J01: General principles for measurement of surface colour.
- ISO 105-J02:1997 Part J02: Instrumental assessment of relative whiteness.
- ISO 105-J03:2009 Part J03: Calculation of colour differences.
- ISO 105-J05:2007 Part J05: Method for the instrumental assessment of the colour inconstancy of a specimen with change in illuminant (CMCCON02).
- ISO 105-N01:1993 Part N01: Colour fastness to bleaching: Hypochlorite.
- ISO 105-N02:1993 Part N02: Colour fastness to bleaching: Peroxide.
- ISO 105-N03:1993 Part N03: Colour fastness to bleaching: Sodium chlorite (mild).
- ISO 105-N04:1993 Part N04: Colour fastness to bleaching: Sodium chlorite (severe).
- ISO 105-N05:1993 Part N05: Colour fastness to stoving.
- ISO 105-P01:1993 Part P01: Colour fastness to dry heat (excluding pressing).
- ISO 105-P02:2002 Part P02: Colour fastness to pleating: Steam pleating.
- ISO 105-S01:1993 Part S01: Colour fastness to vulcanization: Hot air.
- ISO 105-S02:1993 Part S02: Colour fastness to vulcanization: Sulfur monochloride.
- ISO 105-S03:1993 Part S03: Colour fastness to vulcanization: Open steam.
- ISO 105-X01:1993 Part X01: Colour fastness to carbonizing: Aluminium chloride.
- ISO 105-X02:1993 Part X02: Colour fastness to carbonizing: Sulfuric acid.
- ISO 105-X04:1994 Part X04: Colour fastness to mercerizing.
- ISO 105-X05:1994 Part X05: Colour fastness to organic solvents.
- ISO 105-X06:1994 Part X06: Colour fastness to soda boiling.
- ISO 105-X07:1994 Part X07: Colour fastness to cross-dyeing: Wool.
- ISO 105-X08:1994 Part X08: Colour fastness to degumming.
- ISO 105-X09:1993 Part X09: Colour fastness to formaldehyde.
- ISO 105-X10:1993 Part X10: Assessment of migration of textile colours into polyvinyl chloride coatings.
- ISO 105-X11:1994 Part X11: Colour fastness to hot pressing.
- ISO 105-X12:2001 Part X12: Colour fastness to rubbing.
- ISO 105-X 13:1994 Part X13: Colour fastness of wool dyes to processes using chemical means for creasing, pleating and setting.
- ISO 105-X14:1994 Part X14: Colour fastness to acid chlorination of wool: Sodium dichloroisocyanurate.
- ISO 105-X16:2001 Part X16: Colour fastness to rubbing—Small areas.
- ISO 105-X18:2007 Part X18: Assessment of the potential to phenolic yellowing of materials.
- ISO 105-Z01:1993 Part Z01: Colour fastness to metals in the dye-bath: Chromium salts.
- ISO 105-Z02:1993 Part Z02: Colour fastness to metals in the dye-bath: Iron and copper.
- ISO 105-Z03:1996 Part Z03: Intercompatibility of basic dyes for acrylic fibres.
- ISO 105-Z04:1995 Part Z04: Dispersibility of disperse dyes.
- ISO 105-Z05:1996 Part Z05: Determination of the dusting behaviour of dyes.
- ISO 105-Z06:1998 Part Z06: Evaluation of dye and pigment migration.
- ISO 105-Z07:1995 Part Z07: Determination of application solubility and solution stability of water-soluble dyes.
- ISO 105-Z08:1995 Part Z08: Determination of solubility and solution stability of reactive dyes in the presence of electrolytes.
- ISO 105-Z09:1995 Part Z09: Determination of cold water solubility of water-soluble dyes.
- ISO 105-Z10:1997 Part Z10: Determination of relative colour strength of dyes in solution
- ISO 105-Z11:1998 Part Z11: Evaluation of speckiness of colorant dispersions.
- ISO 108:1976 Textile machinery and accessories—Weaving looms—Definition of left and right sides.
- ISO 109:1982 Textile machinery—Working widths of weaving machines.
- ISO 110:1978 Textile machinery and accessories—Cones for yarn winding (cross wound) -- Half angle of the cone 9 degrees 15' [Withdrawn without replacement].
- ISO 111:1978 Textile machinery and accessories—Cones for yarn winding (cross wound) -- Half angle of the cone 4 degrees 20' [Withdrawn: Replaced with ISO 8489-3].
- ISO 112:1983 Textile machinery and accessories—Cones for yarn winding (cross wound) -- Half angle of the cone 3 degrees 30' [Withdrawn: Replaced with ISO 8489-2].
- ISO 113:2010 Rolling bearings—Plummer block housings—Boundary dimensions.
- ISO 114:1980 99.8 Unalloyed magnesium ingots—Chemical composition [Withdrawn: Replaced by ISO 8287].
- ISO 115:2003 Unalloyed aluminium ingots for remelting—Classification and composition.
- ISO 119:1977 Plastics—Phenol-formaldehyde mouldings—Determination of free phenols—Iodometric method.
- ISO 120:1977 Plastics—Phenol-formaldehyde mouldings—Determination of free ammonia and ammonium compounds—Colorimetric comparison method.
- ISO 121:1980 Magnesium-aluminium-zinc alloy ingots and alloy castings—Chemical composition and mechanical properties of sand cast reference test bars [Withdrawn: replaced by ISO 16220].
- ISO 123:2001 Rubber latex—Sampling.
- ISO 124:2011 Latex, rubber—Determination of total solids content.
- ISO 125:2011 Natural rubber latex concentrate—Determination of alkalinity.
- ISO 126:2005 Natural rubber latex concentrate—Determination of dry rubber content.
- ISO 127:2012 Rubber, natural latex concentrate—Determination of KOH number.
- ISO 128 Technical drawings—General principles of presentation.
- ISO 129
- ISO 129-1:2004 Technical drawings—Indication of dimensions and tolerances—Part 1: General principles.
- ISO 129-4:2013 Technical product documentation (TPD) -- Indication of dimensions and tolerances—Part 4: Dimensioning of shipbuilding drawings.
- ISO 131:1979 Acoustics—Expression of physical and subjective magnitudes of sound or noise in air [Withdrawn without replacement].
- ISO 132:2011 Rubber, vulcanized or thermoplastic—Determination of flex cracking and crack growth (De Mattia).
- ISO 133:1983 Rubber, vulcanized—Determination of crack growth (De Mattia) [Withdrawn: Replaced with ISO 132].
- ISO 136:1972 Steel—Simple torsion testing of wire [Withdrawn replaced by ISO 7800].
- ISO 137:1975 Wool—Determination of fibre diameter—Projection microscope method.
- ISO 139:2005 Textiles—Standard atmospheres for conditioning and testing.
- ISO 140 Acoustics—Measurement of sound insulation in buildings and of building elements.
- ISO 140-2:1991 Part 2: Determination, verification and application of precision data.
- ISO 140-4:1998 Part 4: Field measurements of airborne sound insulation between rooms.
- ISO 140-5:1998 Part 5: Field measurements of airborne sound insulation of façade elements and façades.
- ISO 140-7:1998 Part 7: Field measurements of impact sound insulation of floors.
- ISO 140-14:2004 Part 14: Guidelines for special situations in the field.
- ISO 140-18:2006 Part 18: Laboratory measurement of sound generated by rainfall on building elements.
- ISO 141:1976 Textile machinery and accessories—Pirn winders and cross winders—Definition of left and right sides.
- ISO 142:1976 Textile machinery and accessories—Weaving preparatory machines—Definition of left and right sides.
- ISO 143:1977 Textile machinery and accessories—Weft pirns for automatic looms [Withdrawn without replacement].
- ISO 144:1973 Steel—Reverse bend testing of wire [Withdrawn: replaced with ISO 7801].
- ISO 146:1984 Metallic materials—Hardness test—Verification of Vickers hardness testing machines HV 0,2 to HV 100 [Withdrawn replaced with ISO 6507-2].
- ISO 146-2:1993 Metallic materials—Verification of Vickers hardness testing machines—Part 2: Less than HV 0,2 [Withdrawn replaced with ISO 6507-2].
- ISO 148 Metallic materials—Charpy pendulum impact test.
- ISO 148-1:2009 Part 1: Test method.
- ISO 148-2:2008 Part 2: Verification of testing machines.
- ISO 148-3:2008 Part 3: Preparation and characterization of Charpy V-notch test pieces for indirect verification of pendulum impact machines.
- ISO 150:2006 Raw, refined and boiled linseed oil for paints and varnishes—Specifications and methods of test.
- ISO 155:1998 Belt drives—Pulleys—Limiting values for adjustment of centres.
- ISO 156:1982 Metallic materials—Hardness test—Verification of Brinell hardness testing machines [Withdrawn replaced by ISO 6506-2].
- ISO 157:1996 Coal—Determination of forms of sulfur.
- ISO 160:1980 Asbestos-cement pressure pipes and joints [Withdrawn without replacement].
- ISO 161 Thermoplastics pipes for the conveyance of fluids—Nominal outside diameters and nominal pressures.
- ISO 161-1:1996 Part 1: Metric series.
- ISO 161-2:1996 Part 2: Inch-based series.
- ISO 162:1985 Cinematography—Head gaps and sound records for three-, four-, or six-track magnetic sound records on 35 mm and single-track on 17,5 mm motion-picture film containing no picture—Positions and width dimensions.
- ISO 171:1980 Plastics—Determination of bulk factor of moulding materials.
- ISO 172:1978 Plastics—Phenol-formaldehyde mouldings—Detection of free ammonia.
- ISO 174:1974 Plastics—Homopolymer and copolymer resins of vinyl chloride—Determination of viscosity number in dilute solution [Withdrawn replaced by ISO 1628-2].
Back to list Home Continue
Tuesday, March 31, 2020
TRAINING MODULE 1: QUALITY MANAGEMENT- PDCA - ISO 9001 (CONTINUED)
>>PLAN-DO-CHECK-ACT (PDCA) CYCLE
![]() |
| PDCA CYCLE Plan-Do-Check-Act |
Plan: Establish the objectives of the system and its processes, and also the resources needed to deliver results in accordance with customer's requirement(s) and the organization’s policies to maintain strategic direction of the Quality Management System
Do: Implement what was planned to maintain the strategic direction of the Quality Management System.
Check: Monitor and (where applicable) Measure processes and the resulting products and services against policies, objectives, and requirements and report the results.
Act: Take actions to improve performance wherever it is applicable and/or Customer Requirements.
>>POTENTIAL ADVANTAGES OF PDCA
- Reduce Risk and Increase Opportunities for the organization.
- Facilitate better Business Processes within the organisation.
- Minimize Waste and Energy Bills contributing to increases profits.
- Enhance Company Reputation among the customers.
- Improve Compliance with the product and services.
- Meet Concerns of Interested B2B and/or B2C Parties.
- The gain in the International Recognition.
- Improve Marketing Potential of the product and services.
>>ISO 9001:2015 IN BRIEF
ISO 9001 is among ISO's most well-known standards ever. They are implemented by more than a million organizations in some 175 countries. ISO 9001 helps organizations to implement Quality Management. ISO 9001 is for Quality Management. Quality refers to all those features of a product (or service) which are required by the customer. Quality Management means what the organization does to ensure that its products or services satisfy the customer's Quality Requirements.
Comply with any Regulations applicable to those products or services. Enhance Customer Satisfaction, and Achieve Continual Improvement of its performance. ISO 9001 is a generic standard which means that the same standards can be applied to any organization, large or small, whatever its product or service in any sector of activity, and whether it is a business enterprise, a public administration, or a government department
Both ISO 9001 concern the way an organization goes about its work. They are neither product standards nor service standards but they are process standards. And they can be used both by the Product Manufacturer and Service Providers.
>>CERTIFICATION AND REGISTRATION
Certification is known in some countries as registration. It means that an Independent, External Body has audited an organization's management system and verified that it conforms to the requirements specified in the standard (ISO 9001). ISO does not carry out certification and does not issue or approve certificates.
>>ACCREDITATION
Accreditation is like certification of the certification body. Certificates issued by accredited certification bodies - and known as accredited certificates - may be perceived on the market as having increased credibility. ISO does not carry out or approve accreditations.
CONTINUED....>>
Wednesday, July 4, 2018
ISO 1:2016 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS)
ISO 1:2016 is an international standard set by the International Organization for Standardization (ISO) that specifies the standard reference temperature for geometrical product specification and verification. The temperature is fixed at 20°C, which is equal to 293.15 kelvins and 68 degrees Fahrenheit.
Due to thermal expansion, precision length measurements need to be made at a defined temperature. ISO 1 helps in comparing measurements by defining such a reference temperature. The reference temperature of 20 °C was adopted by the CIPM on 15 April 1931 and became ISO recommendation number 1 in 1951. It soon replaced worldwide other reference temperatures for length measurements that manufacturers of precision equipment had used before including 0 °C, 62 °F and 25 °C. Among the reasons for choosing 20 °C was that this was a comfortable and practical workshop temperature and that it resulted in an integer value on both the Celsius and Fahrenheit scales.
DIRECTORY OF ISO REGISTRARS OR CERTIFICATION BODIES
A Certification body is nothing but a registrar that is competent and authorised to issue Certification on Management System after successful completion of the Management System Audit.
There are few criteria’s which distinguish the ISO registers from one another:
1) 100% success rate on Project Completion- They should be having 100% success rate on project completion with full efficiency. To deliver project on time you need people who are disciplined and punctual, also having a high standard of understanding of the management systems.
2) Competent Auditors within the organization- They should be having competent auditors for the auditing of their clients. Most of the organisations spend least on auditors and more on the marketing. That needs to be opposite, Organisations need to spend more on the qualified auditors in their payroll.
3) Auditors on every industry sector- There should be auditors or auditor from every industry sector, they should be aware of all the technical informations that are needed for the auditing purpose. The auditor must be updated with standard specific information that are also need to audit firms.
The list below is the list of Registers who are operational in India(some) as well as Globally in ISO Auditing, Certification and Testing
1. PECB (Global)
2. British Standards Institution (Global)
3. DNV GL (Global)
4. DQS Inc (Global)
5. NSF- ISR (Global)
6. Alcumus (Britain)
7. TUV Rheinland (Global)
8. TUV SUD (Global)
9. TUV NORD (Global)
10. DAS Certification (Global)
11. Certification Europe (Global)
12. Certification International (Global)
13. TUV Management Service (Global)
14. EAGLE Certification Group (Global)
15. ABS Quality Evaluations Inc (Global)
16. Intertek Systems Certification (Global)
17. Alliance International Registrar (Global)
18. American Global Standards LLC (Global)
19. Bureau of Assessment Services (Global)
20. The Registrar Company Inc (North America)
21. Bureau Veritas Certification (Global)
22. Guardian Independent Certification GIC (Global)
23. International Quality Registrars Corporation (Global)
24. Government and Military Certification Systems (Global)
25. Advantage International Registrar (North America)
26. RoyalCert International Registrars (Global)
27. Zenith Quality Assessors Pvt Ltd (India)
28. International Certifications Ltd (Global)
29. Underwriters Laboratories Inc (Global)
30. Performance Review Institute (Global)
31. Smithers Quality Assessments (USA)
32. NSAI Inc (North and South America)
33. KVQA Pvt. Ltd (India)
34. URS Pvt. Ltd (India)
Disclaimer:
ISO Guides does not certify or guarantee the Competence or Expertise of the organizations listed on our blog. This is for informative purposes only. We (Iso Guides) will not be responsible for any losses that may have caused due to Business Association of any of the above companies for any Service or Product which are acquired in any form, either direct or indirect.
Tuesday, April 17, 2018
QUALIFICATION AND EXPERIENCE REQUIREMENTS FOR TL 9000 CERTIFICATION BODY AUDITORS (CBAs)
QUALIFICATION
AND EXPERIENCE REQUIREMENTS FOR TL 9000 CERTIFICATION BODY AUDITORS (CBAs)
SECTION 1: GENERAL
Auditors of
quality management systems shall, at a minimum, meet the education, training, work
experience, audit experience of ISO/IEC 17021, and have the following:
A.
Auditing Experience: Participation in at least four
audits for a minimum of 20 days that cover all the elements of the ISO 9001
standard within the last three years and have the ability to cover all the
elements as determined by the CB’s audit program manager or equivalent person.
B.
Education: Conform to the Certifications Body’s
requirements for maintenance of qualifications, which must include the current
version of the TL 9000 Quality Management System Requirements Handbook and TL
9000 Quality Management System Measurements Handbook.
SECTION 2:
QUALIFICATION REQUIREMENTS FOR TL 9000 AUDITORS
a) Meet the requirements for auditors noted in Section
1(General).
b) Completed and passed the QuEST Forum sanctioned TL
9000 Quality Management System Requirements and Measurements Auditing training,
any required pre-requisite courses, and any supplemental required training.
c) Complete TL 9000 Auditor Apprenticeship Program for
Measurements as defined below:
I. Each CB Auditor Apprentice shall observe a TIEA or TL
9000 Lead Auditor conducting a full audit of the collection, validation, and
reporting of all measurements applicable to a certified organization as
outlined in TL 9000 RHB.
II. After observation is completed by the Apprentice, the
Apprentice is required to conduct or lead an audit for a measurement specialty
witnessed by a TIEA or TL 9000 Lead Auditor.
III. The apprentice observation record and witness record
must be approved by the respective TIEA or TL 9000 Lead Auditor and the
respective CB. Upon verification of completion of the Apprenticeship Program by
the auditor, the CB shall provide the auditor with the Apprenticeship
Completion record. The record of completion will be recognized by all other TL
9000 CBs.
(d) Maintenance Requirements for TL 9000 Auditors are Participating
in at least three TL 9000 audits per three-year period with a minimum of 2.0
CEUs in topics related to the telecommunications or information &
communication technology industries per three-year period, including any
additional courses required by the QuEST Forum and, if desired, participation
in the QuEST Forum Conferences and / or work group meetings
SECTION
3: QUALIFICATION REQUIREMENTS FOR TL 9000 LEAD AUDITORS
For auditors to
be TL 9000 qualified to lead TL 9000 audits, they shall:
a) Meet all of the requirements for
auditors as noted in Sections 1 and 2 above.
b) Meet the CB’s qualifications for
leading audits.
c) Maintenance Requirements for TL 9000
Lead Auditors:
i.
participating in at least six TL 9000 audits per three-year period, acting as
audit team leader in at least two of these audits.
ii.
Completing a minimum of 3.0 CEUs in topics related to the telecommunications or
Information & Communications Technology industry per three-year period,
including any additional courses required by the QuEST Forum, and, if desired,
participation in the QuEST Forum Conferences and/or work group meetings.
iii.
Acting as the audit team leader in an audit witnessed by a TIEA during the
first 12 months of each new three-year period.
SECTION 4: QUALIFICATION
REQUIREMENTS FOR TIEA:
a) Compliance with the
requirements for TL 9000 Auditor (Section 2) and TL 9000 Leader Auditor
(Section 3).
b) Actively participate in
at least three QuEST Forum activities during the most recent six months.
c) Must have at least two
years within the last 5 years of relevant workplace experience (as defined by
the NACE code or equivalent method used by the CB) in the Telecommunications/
Information & Communications Technology industries.
d) Performed the role of
Lead Auditor in a minimum of 10 TL 9000 audits (certifications,
recertifications, or surveillances audits covering each H, S, and/or V
specialty/(ies) at least twice), within the past 5 years, with at least one
audit in the previous 12 months.
e) Maintenance Requirements
for TIEAs:
i. Participating in at least
nine TL 9000 audits per three-year period, including witness audits.
ii. Acting as audit team
leader in at least three of the nine audits.
iii. Continuing to actively
(see Appendix B) participate in QuEST Forum conference and/or Workgroup
meetings/activities. At a minimum, a TIEA is required to participate in six activities
per year with no two-quarter gap in participation.
iv. Completing a minimum of
4.0 Continuing Education Units (CEUs) in topics related to the telecommunications
or Information & Communications Technology industry per three year period,
including:
A. Any additional courses required by the QuEST
Forum.
B. Participation in the QuEST Forum Conferences
and / or work group meetings.
Monday, October 17, 2016
KEY BENEFITS OF IMPLEMENTATION OF ISO 9001 QMS
ISO 9001 Quality Management System has a major misconception among clients or customers that is "what actually ISO 9001 certifies within the organization". Few people take ISO 9001 certification as a "Product Certification" which is in totally different in practical scenario(s). ISO 9001 deals with the Process within an Organisation and certifies that the organization is following the International Standards which are published by ISO "International Organisation for Standardisation". The certification is proof that you are in line with all the norm(s) and clause(s) of the International Standards. Now the question comes why people should implement ISO 9001 in the business and what the impact on the length based on the certification and implementation. Well, there are benefits of implementing ISO 9001 in your business but you should be an active player in Quality Assurance, otherwise having a certificate in your office will not get you anything. Moreover, the standards are designed in such a way that if you are not an Active player in Quality Assurance then you are losing your credibility and competitiveness in the market.
KEY BENEFITS OF IMPLEMENTATION
RISK-BASED APPROACH:
Risk in ISO 9000:2015 is defined as an ‘effect of uncertainty’. An effect is a deviation from the expected, which can be either Positive or Negative outcomes and in this standard ISO 9001 ‘opportunities’ can derive from either. Hence, ISO 9001:2015 refers addressing to both risks and opportunities at the same time and to mitigate risk at an early stage to increase the opportunity. And how to address both identify both within a finite resource and time.
One of the purposes of the ISO 9001 QMS is to act as a preventive tool. Consequently, Standards does not have separate clauses/sub-clause titles such as ‘Preventive action’. This concept is expressed through a risk-based approach to formulating QMS Requirements. The concept of risk-based thinking is explicit in ISO 9001 Quality Management System Standard and incorporated throughout its requirements. It does not advocate a Risk Management approach though, as detailed in the ISO 31000.
Monday, May 23, 2016
TOP 10 REASONS TO GET AN ISO CERTIFICATION
1. ISO certifications helps smaller businesses to compete with bigger enterprises by providing same customer experience.
2. ISO certifications can open up export markets for businesses which mostly deals in Appeals, Leather Garments, Leather Accessories, toys etc.
3. ISO certifications help to discover and maintain the best business practices and processes to keep up with the changing market.
4. ISO certifications drive efficiency in business procedures.
5. ISO certifications add credibility and confidence to customers.
6. ISO certifications can create new business and sales opportunities.
7. ISO certifications can give the company a competitive edge.
8. ISO certifications are all Internationally Recognized and followed in more than 150+ countries with the same standard and procedures.
9. ISO certifications can help a company to grow and develop.
10. ISO certifications enable a common language code of quality worldwide in more than 150+ member nations.
IMPLEMENTATION Of ISO 9001:2015 (QMS)
STEP 1 AWARENESS PROGRAMME
- Basic ISO understanding through Awareness Presentation(AP)or meeting.
- Derivation of Quality Policy and its Objectives.
STEP 2 GAP ANALYSIS
- For existing documentation present with respect to new documents.
- Formats to Excluded and Formats to be Included.
STEP 3 QUALITY POLICY AND OBJECTIVES
- Setting Objectives and Targets.
- Setting Departmental goals with respect to overall objectives of the organization.
STEP 4 DOCUMENTATION
- Apex Manual.
- Procedural Manual.
- Work Instructions and Specification.
- Development of Process Maps.
STEP 5 TRAINING ON IMPLEMENTATION
- Departmental Sitting for understanding of implementation of the department specific procedures.
- Departmental sitting for implementation of generic procedures.
STEP 6 INTERNAL AUDIT
- To train adequate no. of auditors for effective Implementation & Assessment of ISO-9001:2015.
- Internal audit be conducted by the organization at least once before certification and after implementation of new system.
STEP 7 MANAGEMENT REVIEW MEETING (NOT COMPULSORY)
- Management Review Meeting to be conducted by the organization to review effectiveness of the implemented system.
STEP 8 SHADOW/PRE- ASSESSMENT AUDIT
- Conducted to assess QMS Implementation Effectiveness.
STEP 9 CERTIFICATION BODY AUDIT
- The Final Process of Certification is confirmation of the all Documents provided for the Certification and issue of the Certificate to the Organisation.
Monday, February 1, 2016
ISO (INTERNATIONAL ORGANISATION FOR STANDARDISATION)
From the 1920s to the 1940s, the quality
products were ensured by the quality control. At the end of a factory
production line, there was usually a team of people carrying out inspections to
weed out products that would not meet customer requirements. At the end of the
1940s, the Department of Defence in the USA recognised the benefits of a system
that had transformed the Japanese Manufacturing Industry. The standardized
system, developed by the Department of Defence, was called Quality Assurance
and involved organisations establishing procedures to manage all the functions
that affected the quality of the manufactured products.
The British Standards Institution (BSI)
published the first edition of its BS 5750 series of Quality Assurance
Standards in 1979 (focus-consistency). These were designed to be used by any
manufacturer. They enabled organisations to become certified, allowing them to
display a mark of registration that was issued by the body that carried out the
assessment. In 1987, the International Organisation of Standardisation (ISO)
based its ISO 9000 family of standards on BS 5750. The ISO 9000 Standards were
adopted by the European Community (Now the European Union). They were also
adopted (for example) in the UK and the series of standards is called BS EN ISO
9000.
Although the Standards were identified as
being suitable for organisations
delivering services, as well as for those
who are engaged in the manufacturing products, some adaptations were needed. In
1994, they were revised to make them more user-friendly for service industries
(Focus-customer satisfaction), and by the year 2000 a major revision was complete
(Focus-Continual Improvement).
ISO as in ISO 9001 represents
International Organisation for Standardisation. The word derived from the greek
word "ISOS" which mean "Equal". ISO (International
Organisation for Standardisation) is the World's Largest Developer and
publisher of International Standards. ISO is a network of the national
standards institutes of more than 160+ countries with one member
per country and a Central Secretariat in Geneva, Switzerland to
coordinates the system. ISO is a Non-Government organisation that
forms a bridge between the public and private sectors.
On the one hand, many of its member
institutes are part of the governmental structure
of their countries. or are mandatory by their government. On the
other hand, other members have their roots uniquely in the private sector,
having been set-up by the national partnerships of the
industry associations. Therefore, ISO enables a consensus to be
reached on solutions that meet both the requirements of business and the
broader needs of society.
Because "International Organization
for Standardization" would have different acronyms in different languages
("IOS" in English, "OIN" in French for Organisation
internationale de normalisation), its founders decided to give it also a short,
all-purpose name. They chose "ISO", derived from the Greek isos,
meaning "equal". Whatever the country, whatever the language, the
short form of the organization's name is always ISO.
Subscribe to:
Posts (Atom)


