Showing posts with label ISO 900. Show all posts
Showing posts with label ISO 900. Show all posts
Monday, November 2, 2020
LIST OF INTERNATIONAL ORGANISATION OF STANDARDISATION (ISO) STANDARDS. (ISO 200-999)
Sunday, November 1, 2020
LIST OF INTERNATIONAL ORGANISATION OF STANDARDISATION (ISO) STANDARDS. (ISO 1-99)
INTRODUCTION
ISO stands for the International Standardisation Organisation which is an independent body for the development and publishing of International Standards. ISO is a network of the National Standards Institutes in more than 160+ countries with one member per country and a Central Secretariat in Geneva, Switzerland that coordinates the system. ISO is a Non-Government Organisation that forms a bridge between the Public and Private sectors for the development of standards and norms for different industries.
This blog post is a summary of all the standards that were published by the International Organisation of Standardisation.
SERIES FROM ISO 1 TO ISO 99
- ISO 8:1977 Documentation – Presentation of periodicals.
- ISO 9:1995 Information and documentation – Transliteration of Cyrillic characters into Latin characters – Slavic and non-Slavic languages.
- ISO 11:1987 Aircraft – Ground pressure testing connections for pressure cabins.
- ISO 12:1987 Aerospace – Pipelines – Identification.
- ISO 14:1982 Straight-sided splines for cylindrical shafts with internal centering – Dimensions, tolerances and verification.
- ISO 15:2011 Radial bearings—Boundary dimensions, general plan.
- ISO 16:1975 Acoustics – Standard tuning frequency (Standard musical pitch).
- ISO 17:1973 Guide to the use of preferred numbers and of series of preferred numbers.
- ISO 18:1981 Documentation – Contents list of periodicals.
- ISO 21:1985 Shipbuilding – Inland navigation – Cable-lifters for stud-link anchor chains.
- ISO 22:1991 Belt drives – Flat transmission belts and corresponding pulleys – Dimensions and tolerances.
- ISO 23:1993 Cinematography—Camera usage of 35 mm motion-picture film—Specifications.
- ISO 25:1994 Cinematography—Camera usage of 16 mm motion-picture film—Specifications.
- ISO 26:1993 Cinematography—Projector usage of 16 mm motion-picture films for direct front projection—Specifications.
- ISO 28:1976 Cinematography—Camera usage of 8 mm Type R motion-picture film—Specifications.
- ISO 29:1980 Cinematography—Projector usage of 8 mm Type R silent motion-picture film for direct front projection—Specifications [Withdrawn without replacement].
- ISO 31 Quantities and units [withdrawn: replaced with ISO/IEC 80000].
- ISO 32:1977 Gas cylinders for medical use—Marking for identification of content.
- ISO 34
- ISO 34-1:2010 Rubber, vulcanized or thermoplastic—Determination of tear strength—Part 1: Trouser, angle and crescent test pieces.
- ISO 34-2:2011 Rubber, vulcanized or thermoplastic—Determination of tear strength—Part 2: Small (Delft) test pieces.
- ISO 35:2004 Natural rubber latex concentrate—Determination of mechanical stability.
- ISO 36:2011 Rubber, vulcanized or thermoplastic—Determination of adhesion to textile fabrics.
- ISO 37:2011 Rubber, vulcanized or thermoplastic — Determination of tensile stress-strain properties.
- ISO 41:1980 Shipbuilding—Inland vessels—Covers for deck openings for pumps [withdrawn without replacement].
- ISO 43:1976 Aircraft—Jacking pads.
- ISO 44:1975 Aerospace—Lever-operated, two-position, ON/OFF switches—Directions of operation.
- ISO 45:1990 Aircraft—Pressure refueling connections.
- ISO 46:1973 Aircraft—Fuel nozzle grounding plugs and sockets.
- ISO 48:2010 Rubber, vulcanized or thermoplastic—Determination of hardness (hardness between 10 IRHD and 100 IRHD).
- ISO 49:1994 Malleable cast iron fittings threaded to ISO 7-1.
- ISO 50:1977 Metal pipes—Steel sockets screwed according to ISO 7 [Withdrawn without replacement].
- ISO 53:1998 Cylindrical gears for general and heavy engineering—Standard basic rack tooth profile.
- ISO 54:1996 Cylindrical gears for general engineering and for heavy engineering—Modules.
- ISO 55:1977 Seedlac—Specification [Withdrawn without replacement].
- ISO 57:1975 Bleached lac—Specification [Withdrawn without replacement].
- ISO 60:1977 Plastics—Determination of apparent density of the material that can be poured from a specified funnel.
- ISO 61:1976 Plastics—Determination of apparent density of molding material that cannot be poured from a specified funnel.
- ISO 62:2008 Plastics—Determination of water absorption.
- ISO 63:1975 Flat transmission belts—Lengths [Withdrawn: Replaced with ISO 22].
- ISO 65:1981 Carbon steel tubes suitable for screwing in accordance with ISO 7-1.
- ISO 67:1981 Muscovite mica blocks, thins and films—Grading by size [Withdrawn without replacement].
- ISO 68 ISO general-purpose screw threads – Basic profile.
- ISO 68-1:1998 Metric screw threads.
- ISO 68-2:1998 Inch screw threads.
- ISO 69:1998 Cinematography—16 mm motion-picture and magnetic film—Cutting and perforating dimensions.
- ISO 70:1981 Cinematography—35 mm negative photographic sound record on 35 mm motion-picture film—Position and maximum width dimensions.
- ISO 71:1977 Cinematography—16 mm negative photographic sound record on 16 mm, 35/16 mm and 35/32 mm motion-picture film—Positions and dimensions.
- ISO 74:1976 Cinematography—Image area produced by camera aperture and maximum projectable image area on 8 mm Type R motion-picture film—Positions and dimensions.
- ISO 75 Plastics—Determination of temperature of deflection under load.
- ISO 75-1:2013 Plastics—Determination of temperature of deflection under load—Part 1: General test method.
- ISO 75-2:2013 Plastics—Determination of temperature of deflection under load—Part 2: Plastics and ebonite.
- ISO 75-3:2004 Plastics—Determination of temperature of deflection under load—Part 3: High-strength thermosetting laminates and long-fiber-reinforced plastics.
- ISO 76:2006 Rolling bearings—Static load ratings.
- ISO 78 Chemistry — Layouts for standards.
- ISO 78-2:1999 Chemistry—Layouts for standards—Part 2: Methods of chemical analysis.
- ISO 78-3:1983 Chemistry—Layouts for standards—Part 3: Standard for molecular absorption spectrometry.
- ISO 78-4:1983 Layouts for standards—Part 4: Standard for atomic absorption spectrometric analysis.
- ISO 82:1974 Steel—Tensile testing [Withdrawn: replaced with ISO 6892-1].
- ISO 83:1976 Steel—Charpy impact test (U-notch) [Withdrawn: replaced with ISO 148-1].
- ISO 86:1974 Steel—Tensile testing of sheet and strip less than 3 mm and not less than 0.5 mm thick [Withdrawn: replaced with ISO 6892-1].
- ISO 89:1974 Steel—Tensile testing of wire [Withdrawn: replaced with ISO 6892-1].
- ISO 90 Light gauge metal containers—Definitions and determination of dimensions and capacities.
- ISO 90-1:1997 Light gauge metal containers—Definitions and determination of dimensions and capacities—Part 1: Open-top cans.
- ISO 90-2:1997 Light gauge metal containers—Definitions and determination of dimensions and capacities—Part 2: General use containers.
- ISO 90-3:2000 Light gauge metal containers—Definitions and determination of dimensions and capacities—Part 3: Aerosol cans.
- ISO 91 Petroleum measurement tables.
- ISO 91-1:1992 Petroleum measurement tables—Part 1: Tables based on reference temperatures of 15 degrees C and 60 degrees F.
- ISO 91-2:1991 Petroleum measurement tables—Part 2: Tables based on a reference temperature of 20 degrees C.
- ISO 92:1976 Textile machinery and accessories—Spinning machinery—Definition of side (left or right).
- ISO 93 Textile machinery and accessories—Cylindrical sliver cans.
- ISO 93-1:2006 Textile machinery and accessories—Cylindrical sliver cans—Part 1: Main dimensions.
- ISO 93-2:2006 Textile machinery and accessories—Cylindrical sliver cans—Part 2: Spring bottoms.
- ISO 94:1982 Textile machinery and accessories—Spindle gauges for ring-spinning and ring-doubling frames.
- ISO 96 Textile machinery and accessories—Rings and travelers for ring spinning and ring twisting frames.
- ISO 96-1:2009 Textile machinery and accessories—Rings and travelers for ring spinning and ring twisting frames—Part 1: Flange rings T and SF and their travelers.
- ISO 96-2:2009 Textile machinery and accessories—Rings and travelers for ring spinning and ring twisting frames—Part 2: HZ- and J-rings and their travelers.
- ISO 97:1975 Textile machinery and accessories—Rings for spinning, doubling and twisting for ear-shaped travelers.
- ISO 98:2001 Textile machinery and accessories—Spinning preparatory and spinning machinery—Main dimensions of coverings for top rollers.
- ISO 8:1977 Documentation – Presentation of periodicals.
- ISO 9:1995 Information and documentation – Transliteration of Cyrillic characters into Latin characters – Slavic and non-Slavic languages.
- ISO 11:1987 Aircraft – Ground pressure testing connections for pressure cabins.
- ISO 12:1987 Aerospace – Pipelines – Identification.
- ISO 14:1982 Straight-sided splines for cylindrical shafts with internal centering – Dimensions, tolerances and verification.
- ISO 15:2011 Radial bearings—Boundary dimensions, general plan.
- ISO 16:1975 Acoustics – Standard tuning frequency (Standard musical pitch).
- ISO 17:1973 Guide to the use of preferred numbers and of series of preferred numbers.
- ISO 18:1981 Documentation – Contents list of periodicals.
- ISO 21:1985 Shipbuilding – Inland navigation – Cable-lifters for stud-link anchor chains.
- ISO 22:1991 Belt drives – Flat transmission belts and corresponding pulleys – Dimensions and tolerances.
- ISO 23:1993 Cinematography—Camera usage of 35 mm motion-picture film—Specifications.
- ISO 25:1994 Cinematography—Camera usage of 16 mm motion-picture film—Specifications.
- ISO 26:1993 Cinematography—Projector usage of 16 mm motion-picture films for direct front projection—Specifications.
- ISO 28:1976 Cinematography—Camera usage of 8 mm Type R motion-picture film—Specifications.
- ISO 29:1980 Cinematography—Projector usage of 8 mm Type R silent motion-picture film for direct front projection—Specifications [Withdrawn without replacement].
- ISO 31 Quantities and units [withdrawn: replaced with ISO/IEC 80000].
- ISO 32:1977 Gas cylinders for medical use—Marking for identification of content.
- ISO 34
- ISO 34-1:2010 Rubber, vulcanized or thermoplastic—Determination of tear strength—Part 1: Trouser, angle and crescent test pieces.
- ISO 34-2:2011 Rubber, vulcanized or thermoplastic—Determination of tear strength—Part 2: Small (Delft) test pieces.
- ISO 35:2004 Natural rubber latex concentrate—Determination of mechanical stability.
- ISO 36:2011 Rubber, vulcanized or thermoplastic—Determination of adhesion to textile fabrics.
- ISO 37:2011 Rubber, vulcanized or thermoplastic — Determination of tensile stress-strain properties.
- ISO 41:1980 Shipbuilding—Inland vessels—Covers for deck openings for pumps [withdrawn without replacement].
- ISO 43:1976 Aircraft—Jacking pads.
- ISO 44:1975 Aerospace—Lever-operated, two-position, ON/OFF switches—Directions of operation.
- ISO 45:1990 Aircraft—Pressure refueling connections.
- ISO 46:1973 Aircraft—Fuel nozzle grounding plugs and sockets.
- ISO 48:2010 Rubber, vulcanized or thermoplastic—Determination of hardness (hardness between 10 IRHD and 100 IRHD).
- ISO 49:1994 Malleable cast iron fittings threaded to ISO 7-1.
- ISO 50:1977 Metal pipes—Steel sockets screwed according to ISO 7 [Withdrawn without replacement].
- ISO 53:1998 Cylindrical gears for general and heavy engineering—Standard basic rack tooth profile.
- ISO 54:1996 Cylindrical gears for general engineering and for heavy engineering—Modules.
- ISO 55:1977 Seedlac—Specification [Withdrawn without replacement].
- ISO 57:1975 Bleached lac—Specification [Withdrawn without replacement].
- ISO 60:1977 Plastics—Determination of apparent density of the material that can be poured from a specified funnel.
- ISO 61:1976 Plastics—Determination of apparent density of molding material that cannot be poured from a specified funnel.
- ISO 62:2008 Plastics—Determination of water absorption.
- ISO 63:1975 Flat transmission belts—Lengths [Withdrawn: Replaced with ISO 22].
- ISO 65:1981 Carbon steel tubes suitable for screwing in accordance with ISO 7-1.
- ISO 67:1981 Muscovite mica blocks, thins and films—Grading by size [Withdrawn without replacement].
- ISO 68 ISO general-purpose screw threads – Basic profile.
- ISO 68-1:1998 Metric screw threads.
- ISO 68-2:1998 Inch screw threads.
- ISO 69:1998 Cinematography—16 mm motion-picture and magnetic film—Cutting and perforating dimensions.
- ISO 70:1981 Cinematography—35 mm negative photographic sound record on 35 mm motion-picture film—Position and maximum width dimensions.
- ISO 71:1977 Cinematography—16 mm negative photographic sound record on 16 mm, 35/16 mm and 35/32 mm motion-picture film—Positions and dimensions.
- ISO 74:1976 Cinematography—Image area produced by camera aperture and maximum projectable image area on 8 mm Type R motion-picture film—Positions and dimensions.
- ISO 75 Plastics—Determination of temperature of deflection under load.
- ISO 75-1:2013 Plastics—Determination of temperature of deflection under load—Part 1: General test method.
- ISO 75-2:2013 Plastics—Determination of temperature of deflection under load—Part 2: Plastics and ebonite.
- ISO 75-3:2004 Plastics—Determination of temperature of deflection under load—Part 3: High-strength thermosetting laminates and long-fiber-reinforced plastics.
- ISO 76:2006 Rolling bearings—Static load ratings.
- ISO 78 Chemistry — Layouts for standards.
- ISO 78-2:1999 Chemistry—Layouts for standards—Part 2: Methods of chemical analysis.
- ISO 78-3:1983 Chemistry—Layouts for standards—Part 3: Standard for molecular absorption spectrometry.
- ISO 78-4:1983 Layouts for standards—Part 4: Standard for atomic absorption spectrometric analysis.
- ISO 82:1974 Steel—Tensile testing [Withdrawn: replaced with ISO 6892-1].
- ISO 83:1976 Steel—Charpy impact test (U-notch) [Withdrawn: replaced with ISO 148-1].
- ISO 86:1974 Steel—Tensile testing of sheet and strip less than 3 mm and not less than 0.5 mm thick [Withdrawn: replaced with ISO 6892-1].
- ISO 89:1974 Steel—Tensile testing of wire [Withdrawn: replaced with ISO 6892-1].
- ISO 90 Light gauge metal containers—Definitions and determination of dimensions and capacities.
- ISO 90-1:1997 Light gauge metal containers—Definitions and determination of dimensions and capacities—Part 1: Open-top cans.
- ISO 90-2:1997 Light gauge metal containers—Definitions and determination of dimensions and capacities—Part 2: General use containers.
- ISO 90-3:2000 Light gauge metal containers—Definitions and determination of dimensions and capacities—Part 3: Aerosol cans.
- ISO 91 Petroleum measurement tables.
- ISO 91-1:1992 Petroleum measurement tables—Part 1: Tables based on reference temperatures of 15 degrees C and 60 degrees F.
- ISO 91-2:1991 Petroleum measurement tables—Part 2: Tables based on a reference temperature of 20 degrees C.
- ISO 92:1976 Textile machinery and accessories—Spinning machinery—Definition of side (left or right).
- ISO 93 Textile machinery and accessories—Cylindrical sliver cans.
- ISO 93-1:2006 Textile machinery and accessories—Cylindrical sliver cans—Part 1: Main dimensions.
- ISO 93-2:2006 Textile machinery and accessories—Cylindrical sliver cans—Part 2: Spring bottoms.
- ISO 94:1982 Textile machinery and accessories—Spindle gauges for ring-spinning and ring-doubling frames.
- ISO 96 Textile machinery and accessories—Rings and travelers for ring spinning and ring twisting frames.
- ISO 96-1:2009 Textile machinery and accessories—Rings and travelers for ring spinning and ring twisting frames—Part 1: Flange rings T and SF and their travelers.
- ISO 96-2:2009 Textile machinery and accessories—Rings and travelers for ring spinning and ring twisting frames—Part 2: HZ- and J-rings and their travelers.
- ISO 97:1975 Textile machinery and accessories—Rings for spinning, doubling and twisting for ear-shaped travelers.
- ISO 98:2001 Textile machinery and accessories—Spinning preparatory and spinning machinery—Main dimensions of coverings for top rollers.
Monday, May 23, 2016
SEQUENCE OF AUDIT & CERTIFICATION PROCESS FOR ISO 9001
Decision
making on ISO 9001 requirements.
|
To be carried out by the Organization.
|
|
¯
|
||
Analyzing The Organisation for ISO certification.
|
To be carried out by both the Organization and certifying body. | |
¯
|
||
Planning for quality manuals, documented procedure
& ISO 9001 implementation.
|
To be carried out by the Organization or Consultant.
|
|
¯
|
||
Periodic review on preparation for
ISO 9001, Action & Follow up.
|
To be carried out by the Organization. | |
¯
|
||
Satisfactory preparation for ISO Audit.
|
To be carried out by the Organization.
|
|
¯
|
||
Fixing up of dates for Audit.
|
To be carried out by the Organization.
|
|
¯
|
||
Auditing for adequacy of documents.
|
To be carried out by the Organization.
|
|
¯
|
||
Conducting onsite audit at your premises.
|
||
¯
|
||
Clearing the non-conformities raised in Audit.
|
To be carried out by the Organization.
|
|
¯
|
||
Recommending & certifying the
organization with ISO 9001
|
To be carried out by the certifying body.
|
|
¯
|
||
Fixing dates for regular audits (forthcoming years)
|
To be carried out by the Organization or Consultant.
|
|
¯
|
||
Conducting regular audits and up keeping the
certification on satisfactory audit performance.
|
Subscribe to:
Posts (Atom)